1.
Transient Response of Frames Subjected to Suddenly Applied Step Displacement with the Reverberation Ray Matrix;
用回传波射矩阵法分析突加载荷下刚架的瞬态响应
2.
Theory for the Nonlocal Stress Field at the Tip of Crack Type III
Ⅲ型裂纹受突加荷载作用时裂尖应力场的非局部理论解
3.
Design and Realization of the Analog Loading System for the Fluctuating Load;
动态载荷模拟加载系统的设计与实现
4.
Application method for complex loads with ANSYS APDL
基于ANSYS APDL的复杂载荷加载法
5.
We can assume the load dispersion discontinuity lines.
我们可以假设荷载分布的突变线。
6.
Analysis on the circumscription of the heavy camion and its limited loading
重型载重车辆加载安全区域与极限载荷分析
7.
Study of Dummy Experiment for Dash an Increase and Dash a decrease in the load of Marine Generator
船舶发电机突加突卸负荷虚拟实验的研究
8.
Loading and unloading criteria of FRP-confined concrete under cyclic compression
重复荷载作用下碳纤维约束混凝土加卸载准则
9.
The Catastrophe Theory Subjected to Damage of Soil Body under Dynamic Load;
动荷载作用下土体破坏的突变理论应用
10.
BUCKING CRITICAL LOAD ANALYSIS OF Y STYLE VIBRO-PILE BASED ON CUSP CATASTROPHE THEORY
基于尖点突变理论的Y型桩屈曲临界荷载分析
11.
The new machine can increase3 times the payload asagainst1988.
新机器的有效载荷比1988年增加了两倍。
12.
The external forces include reactions (R)as well as applied loads(P).
外力包括反力R和施加力荷载P。
13.
Modal Analysis of RC Simple Supported Beam-Bridge in Attached Load;
混凝土简支梁桥附加荷载下模态分析
14.
Research on application methods of dynamic loads of hydropower house
水电站厂房机组动荷载施加方式研究
15.
Ultimate Strength of Stiffened Plates with a Square Opening Under Axial and Out-of-Plane Loads
轴向荷载与面外荷载作用下带方形开口加肋钢板的极限强度
16.
Effect of Polishing Load on Slurry Film Thickness in Chemical Mechanical Polishing
CMP加工过程中加工载荷对液膜厚度的影响分析
17.
Study on the Rock Mechanics Characteristic by Cyclic Load and Statics Load Fit Together;
循环荷载与静载组合加载下岩石的力学特性试验研究
18.
Dead weight loading simulating that of the bolts was applied at the bolt holes through the agency of steel balls and buttons.
螺栓荷载是用死荷重来模拟的，以钢球和压钮作为代用件，通过它们将此荷载施加于螺栓孔。