1.
Research on the Dynamic Response of the Large-cylinder Shell Structure and Numerical Simulation of the Stochastic Wave Forces;
大直径圆柱壳结构动力响应及随机波浪力数值模拟研究
2.
Mathematical Optimization Model for Embedded Large-Diameter Cylindrical Shell Structure under Lateral Loads
横向荷载作用下插入式大直径圆柱壳结构的优化数学模型
3.
High-Precision On-Line Measuring System for Cylinder Diameter with Large Range
高精度圆柱直径大量程在线测量系统
4.
The diameter of the inside of a round cylinder, such as a tube.
口径圆柱体内侧圆的直径，如管道
5.
Research on the Three-dimensional Computing Method of Earth Pressure for Large-diameter Cylinder;
大直径薄壳圆筒结构筒后土压力的空间计算方法
6.
A large, cylindrical container, usually made of staves bound together with hoops, with a flat top and bottom of equal diameter.
桶圆柱形大容器，常由桶板及周围的铁箍组成，平顶平底且直径等同
7.
Research on the Stability of a Large-diameter Ground-supported Flat-bottomed Cylindrical Steel Silo Load of Alumina Powder
大直径落地式平底氧化铝圆柱钢筒仓稳定性能研究
8.
The Summarization on Measuring of Large Diameter Based on Chord Length and Bow Altitude
基于弓高弦长的大型圆柱工件直径检测方法的研究
9.
Experimental Investigation on Radial Compression Characteristics of TiNi Cylindrical Shell
TiNi相变圆柱壳的径向压缩特性实验研究
10.
Thin Shell Theory Solutions of Two Normally Intersecting Cylindrical Shells for Large Diameter Ratio and Its Verification;
圆柱壳大开孔接管的薄壳理论解及其实验验证
11.
Ring's diameter increases as we move away from the apex of the cone.
诸圆环的直径自圆锥顶逐渐增大。
12.
Three-Dimensional FEA of Large Opening Cylinder with Flatting Nozzle;
大开孔率圆柱壳平齐接管结构三维有限元分析
13.
The Large Deformation for Plastic Instability Phenomenon of the Cylinder Shell under Uniform Intrinsic Pressure;
圆柱壳在均布内压下的大变形弹塑性失稳
14.
Multi-objective optimization analysis of circular cylindrical ring-stiffened shell of submarine with deep diving depth
大深度潜器耐压圆柱壳的多目标优化设计研究
15.
Buckling behavior of thin-walled cylindrical shells with large rectangular opening
矩形大开孔圆柱壳轴压作用下的屈曲性能
16.
Research on Diameter Measurement Technique of Thin Cylinder by Laser Diffraction;
激光衍射法细圆柱体直径测量技术研究
17.
Axi-symmetrical Bending of FGMs Cylindrical Shells and Free Vibration of FGMs Cylindrical Shells with Holes
FGMs圆柱壳轴对称弯曲和FGMs开孔圆柱壳自由振动
18.
The eupatheostat consisted of a vertical cylinder 550 mm high by 190 mm diameter.
拟人器是由一个直径为190mm，高度为550mm的垂直圆柱体构成。