1.
Interfacial Thermal Stresses Analysis of RC Beams Strengthened with CFL
碳纤维薄板增强RC梁界面温度应力理论分析
2.
FATIGUE BEHAVIOR OF RC BEAMS STRENGTHENED WITH CFL UNDER CONSTANT AMPLITUDE LOAD
常幅循环荷载下CFL增强RC梁弯曲疲劳性能研究
3.
EXPERIMENTAL STUDY ON FATIGUE LIFE OF RC BEAMS STRENGTHENED WITH CFL UNDER RANDOM-AMPLITUDE FATIGUE LOAD
随机变幅疲劳荷载下CFL增强RC梁疲劳寿命的试验研究
4.
Experimental Study on Flexural Behavior of Reinforced Concrete Beams Strengthened with Textile Reinforced Concrete
织物增强混凝土（TRC）加固RC梁正截面抗弯性能试验研究
5.
Reliability Analysis of "Strong Column-Weak Beam" Design of RC Frame
RC框架“强柱弱梁”设计的可靠度分析
6.
A Research on Reinforced Condition/Decision Coverage(RC/DC) Criteria
增强条件/判定覆盖(RC/DC)准则的研究
7.
Computational method on axial tension of secondary load RC members strengthened with carbon fiber reinforced plastic sheets
碳纤维布增强二次受力RC构件轴拉计算方法
8.
Studies on RC Beams Strengthened with SMPM Using Finite Element Method
高强钢绞线网-聚合物砂浆加固RC梁的有限元分析
9.
Applying Geopolymer-Bonded Fiber Pastes to RC Beam to Enhance Shear Reinforcement
无机聚合物胶脂纤维贴片应用于RC梁的剪力补强
10.
Pushover analysis on rectangular column frames with different column-to-beam strength ratios
RC矩形柱框架结构不同柱-梁抗弯强度比的Pushover分析
11.
testing method for apparent interlaminar shear strength of carbon fiber reinforced plastics by three point loading method
纤维增强塑料的短梁层间切变强度法
12.
Non-linear Finite Element Analysis of Reinforced Concrete Beams Strengthened with CFRP Sheets;
CFRP加固RC梁非线性有限元分析
13.
Experimental Study on Seismic Behaviour of SRC Column-RC Beam Subassemblages;
SRC柱-RC梁组合件抗震性能试验研究
14.
Experimental Research on Flexural Performance of the RC Beams Strengthened with HPF;
HPF加固RC简支梁的受剪性能研究
15.
The Research about Technical Condition Assessment of Small and Medium Span RC Beam Bridge;
中小跨径RC梁桥技术状态评估研究
16.
Finite Element Analysis of Reinforced Concrete Beam Strengthened with CFRP Sheets Based on ANSYS;
CFRP布加固RC梁的ANSYS有限元分析
17.
Experimental Research on Mechanical Properties of the Existing RC Girder Bridges
既有RC梁桥实桥力学性能试验研究
18.
Experimental study on residual shear capacity of existing corroded RC beams
既有锈蚀RC梁剩余抗剪承载力试验