1.
Discussing on the Equivalent Stiffness Coefficient of Parallel Spring Groups;
关于平行弹簧组等效劲度系数的讨论
2.
reel lifting spring
拨禾轮起落平衡弹簧
3.
HVSS (Horizontal Volute Suspension System)
水平螺旋弹簧悬挂系统
4.
working stroke of spring buffer
弹簧缓冲器工作行程
5.
A spring gauge can be used to measure the spring pressure. Adjustment is made by bending the Breaker-lever spring.
弹簧计用来检测弹簧压力,可弯曲断电器臂弹簧进行调整。
6.
Spring Clinch Joint and Feasible Analysis of Its Application in the Plane Type Space Truss;
弹簧卡节点及其在平板网架中应用的可行性分析
7.
If we let go, the elastic energy, as the spring passes through the equilibrium point, is converted to kinetic energy.
如果我们释放弹簧，那么弹簧经过平衡点时，弹性能就转变为动能。
8.
The end coil of the spring must be closed and flat.
弹簧两端的线圈/簧的端线圈应是闭合且平整的.
9.
top-roll spring balance arrangement
上轧辊的弹簧式平衡装置
10.
UNIMATIC DRUCKLUFT FLUESSIGKEITSTECHNIK GMBH offer to you Pneumatic components and Hydraulics elements in addition also Info on Gas springs.
公司提供气体弹簧、气压减振和弹簧以及座位范围内的可行性方案。
11.
Decrease the tension and increase the stroke of the thread take-up spring.
调弱挑线弹簧的张力，调大动作行程。
12.
Changing the stroke of thread take-up spring 1
挑线弹簧1的行程量调整
13.
Coiled Spring Design by AutoCAD VBA;
利用AutoCAD VBA进行螺旋弹簧设计
14.
"Overheated springs should be replaced, since they may have lost tension and will not operate satisfactorily. Spring pressure can be tested with a spring-tension tester."
过热的弹簧应该更换,因为失去弹性的弹簧运行时达不到满意的效果。可使用弹簧弹力计进行检测。
15.
It was mainly composed of a grooving spring is located in the middle of the artificial vertebral body and the platforms are fixed to the upper and lower ends of the spring by forth-and-back hand thread.
切口弹簧与平台间以正、反向螺丝连接，通过旋转弹簧体可以调节平台的高度。
16.
" Hexagon head bolt, single coil spring lock washer and plain washer assemblies"
"GB/T9074.17-1988六角头螺栓,弹簧垫圈和平垫圈组合件"
17.
The preferred position for the2300 is in a horizontal line with the spring chamber up.
首选位置是在水平管线上，弹簧隔膜朝上。
18.
The flexible diaphragm is connected to a plat cantilever-calibrated spring.
柔韧的膜片一扁平的悬臂校正弹簧相连。