1.
The practice indicates that the service time of bimetals barrel is above three times higher than that of nitrogen hardening one.
生产应用证明：粉末等离子弧喷焊制造的双金属耐磨机筒的使用寿命高出氮化处理件寿命三倍以上。
2.
Study of Wear-resisting Mechanism and Plasma Arc Surfacing of Ni-based Alloy Powder;
镍基合金粉末等离子弧堆焊及耐磨机理的研究
3.
Study on Plasma Torch and Wear-Resistant Alloys by Pta Powder Surfacing;
粉末等离子弧堆焊枪体及耐磨合金的研究
4.
This report describes the structure and the main behavior of a surfacing torch with reverse polarity soft plasma arc and uses alloy powder.
本文介绍了反极性弱等离子弧粉末堆焊枪的结构及其主要特征。
5.
Study on the Application of Plasma Arc Powder Repair Welding in Restoring Petroleum Drill Stem Joint;
等离子弧粉末堆焊在石油钻杆接头修复中的应用研究
6.
air plasma water injection arc cutting machine
喷水空气等离子弧切机
7.
Preparation of Nano-structure Oxide Powder by DC Arc Plasma and Sintered by Spark Plasma Sintering Technique;
氧化物纳米粉末的直流电弧等离子体制备及放电等离子（SPS）烧结
8.
Properties of APS alumina coating with different alumina particle distributions as feedstock
不同氧化铝粉末等离子喷涂氧化铝涂层的性能
9.
Numerical Simulation of Nanostructured Agglomerated Powder Melting Process during Plasma Spraying
等离子喷涂纳米团聚体粉末熔化过程数值模拟
10.
Study on Alloying Elements Impact on Microstructure and Property of the Plasma Arc Welding Layer
合金元素对等离子弧喷焊层组织及性能影响研究
11.
Analysis on power loss of plasma arc in keyhole plasma arc welding
小孔等离子弧焊的等离子弧功率损失分析
12.
Research on Properties of Titanium Dioxide Nanopowders Doped with Metal Ion Prepared by Plasma Spray;
等离子喷涂法制备金属离子掺杂二氧化钛纳米粉末的性能研究
13.
Microstructure and properties of part made by micro-plasma arc direct metal formation
微束等离子弧粉末熔覆金属成形件的组织及性能
14.
In the second part, the preliminary experience of plasma powder overlaying work with valve sealing surface is introduced.
第二部份介绍阀门密封面等离子粉末堆焊工作的初步经验。
15.
Study of Plasma Cloud Sensing of Keyhole Signal in PAW;
等离子弧焊小孔信号的等离子云传感研究
16.
A Simulation of Keyhole Plasma Arc Welding in Aluminium Alloy;
铝合金穿孔型等离子弧焊接过程模拟
17.
The article introduced the principle& characteristic of Plasma Powder Welding and analyzed the superiority& advantage of the application of the technology on manufacturing sealing components of valve.
介绍了等离子粉末喷焊技术的原理、点以及在阀门密封面制造中应用的优越性及经济性效益分析。
18.
STUDY ON FRONT SIDE ARC LIGHT SENSING IN KEYHOLE. MODE PLASMA ARC WELDING
穿孔等离子弧焊正面弧光传感技术研究