1.
TCP/IP Stack Design in Electrical Trip Unit
智能电子脱扣器中TCP/IP协议栈的设计
2.
Testing Instrument Design For DC Electronic Circuit Breaker Based On C8051F350 MCU
基于C8051F350单片机的直流电子脱扣器检测仪的设计与实现
3.
inverse time-delay overcurrent release
反时限过电流脱扣器
4.
definite-time delay over-current release
定时限过电流脱扣器
5.
trip free relay
自由脱扣继电器自由释放继电器
6.
The electromagnetic releases for the Breakers with a capacity of250 A and above abjustable.
250A及以上的断路器，其电磁铁脱扣器是可调的。
7.
Application of Ferroelectric RAM in the System for Testing Releaser Lifetime
铁电存储器在脱扣器寿命测试台系统中的应用
8.
The tripping device is basically divided into the instantaneous electromagnetic release and the time delay thermal release, which are used for protection of circuit from shortcircuit and overload respectively.
断路器由瞬时动作的电磁脱扣器和延时动作的热脱扣器组成，分别用作线路的短路和过载保护。
9.
The Breaker can be attached with shunt tripping device, undervoltage tripping device, auxiliary contacts, alarm contacts and motor-operated drive.
断路器可以加装分励脱扣器、压脱扣器，辅助触头，报警触头和电动操作机构。
10.
The Breaker can be attached with shunt tripping device, undervoltage tripping device, auxiliary contacts ,alarm contacts and motor-operated drive.
断路器可以加装分励脱扣器、欠压脱扣器，辅助触头，报警触头和电动操作机构。
11.
The Research on Methods and Uncertainty of Measuring Electric Quantity about Intelligent Release;
智能脱扣器电参数测量方法及不确定度的研究
12.
Shunt Trip Shunt trip is a feature added to a circuit breaker or fusible switch to permit the remote opening of the breaker or switch by an electrical signal.
分励脱扣分励脱扣是线路断路器或可熔电闸的一个特性，可通过远程信号来进行分断或转换。
13.
All preferential tipping and CO2 tripping consumers on MSB and local starters shall be provided with corresponding labels.
主配电板上的所有优先脱扣和二氧化碳脱扣用户以及机旁启动器应配有相应的标牌。
14.
inverse-time thermo-overcurrent trip
反时限热过电流脱扣
15.
The shunt tripping device is used for a remote control of disconnection of the Breaker.
分励脱扣器用作远距离断开断路器。
16.
EPMA Analysis of the Dezincification Corrosion of Condenser Copper Alloy Tubes
电厂凝汽器铜管脱锌腐蚀的电子探针分析
17.
Setting of Flux Converter Tripping Force in Air Circuit-Breakers
空气断路器中磁通变换器脱扣力的确定
18.
Simulation and Optimization of Dynamic and Static Characteristics of Instantaneous Release in Case-Moulded Circuit Breaker
塑壳断路器瞬时脱扣器动静特性仿真及优化