1.
the VGRS (Variable Gear Ratio Steering) actuator which controls the front-wheel steering angle
控制前轮转向角度的可变齿比转向系统（VGRS）
2.
The research Based on cycloidal automotive steering device of front-wheel steering angle adaptive control function
基于前轮转向角度自适应控制功能的摆线式汽车转向器研究
3.
Steer-by-Wire Front Wheel System Control Strategy Research Based on HILS
线控转向前轮转角控制策略硬件在环仿真研究
4.
A Test Bed for the Deviation of Steering Wheel Angle and the Center Plane of Front-Rear Wheels of Motorcycles(1)
摩托车转向轮转角及前后轮中心平面偏差测试台(1)
5.
Analysis and simulation on following-up steering of the angle input of car front wheel
轿车前轮角输入的随动转向分析与仿真
6.
Study on feedback control of yaw angle rate based on active front steering
基于主动前轮转向横摆角速度反馈控制的研究
7.
The Effects of Front Wheel Caster Angle on Vehicle Steering Stability with Consideration of Body Roll
车身侧倾时前轮主销后倾角对转向稳定性的影响
8.
On full lock, ie with the steering-wheel turned as far as it will go one way or the other
前轮最大限度转向（方向盘转到头）
9.
My car has a good lock, ie can turn within a short distance.
我的汽车前轮转向很好（转弯用地小）.
10.
rudder pedal steering system
方向舵脚蹬操纵式前轮转向系统
11.
Vehicle's front wheels by use of the steering-wheel
（机动车方向盘旋转时）前轮转向（的最大程度）
12.
Analysis of the Impact of Wheel’s Camber and Toe-in to Turning Wheel’s Side Skidding
车轮外倾与前束对转向轮侧滑的影响分析
13.
front wheel and rear bogie steer grader
前轮及后平衡架转向式平地机
14.
"Steering kickback. Steering shock, or kickback, becomes evident as sharp and rapid movements of the steering wheel when the front wheels encounter obstructions in the road."
转向回跳:当前轮遇到道路上的障碍时,转向轮振动或回跳明显加剧。
15.
Go straight down this street until you reach the corner, and then turn right.
沿路向前走直到转角处，然后右转。
16.
"Not only must the front wheels move up and down with respect to the car frame (for spring action), But also they must be able to swing at various angles to the car frame for steering."
前轮不仅要相对车架做上下运动(由于弹簧作用),而且在转向时能够相对车架做各种角度的摆动。
17.
The steering system permits the front wheels to be pivoted on their supports to the right left so that the car can be steered.
转向系统使前轮在支架上绕一轴线左右转动,由此实现汽车转向。
18.
A positive value indicates that the wheel was rotated forward, away from the user; a negative value indicates that the wheel was rotated backward, toward the user.
正值表示滚轮向前旋转，即远离用户的方向；负值表示滚轮向后旋转，即朝向用户的方向。