1.
Study of Method of Conducting Smooth Blasting in Weak and Soft Surrounding Rocks
软弱围岩中光面爆破掏槽孔方案研究
2.
The kibble hole arrangement optimization of tunnel digging blasting of Daanshan mine
大安山矿巷道掘进爆破掏槽孔布孔优化
3.
Study on Effect of Symmetry of Wedge-shaped Cutting Hole Angle on Cut Blasting
楔形掏槽炮孔角度对称性对掏槽效果影响研究
4.
Numerical Simulation Research of Charging Optimization in Spiral Cutting Blasting in Medium Deep Bore
中深孔掏槽爆破装药优化的数值模拟研究
5.
A Study and Application of Methods of Longhole Cutting and Joint-cutting Cartridge in Shaft Excavation Blasting;
竖井中深孔掏槽和切缝药包法的研究与应用
6.
Popularization and Application of Deep-hole Blasting Technique in Bottom Compound-term Wedge Cutting
底部复式楔形掏槽中深孔爆破技术的推广应用
7.
Research on Size Effect of Empty Hole in Horizontal Roadway Cut Blasting & Accumulating Characteristic of Surrounding Rock Damage Caused by Frequently Blasting Vibration;
平巷掏槽爆破空孔尺寸效应及围岩频繁震动损伤累积特性研究
8.
sublevel undercut caving method
分段下部掏槽崩落开采
9.
The Norwegian cut can provide more dependable advance per round than the plough cut.
挪威掏槽与楔形掏槽相比，可以提供更可靠的每次爆破的进度。
10.
During recent years the seam cut has once again come into use.
近几年来，又再度使用了裂缝掏槽。
11.
If the charge used is too large, the rock can become sintered so that the cut used is a failure.
如装药量太大，岩石就会挤死，使掏槽失败。
12.
Application of cut blasting in trench digging technique in the middle of the stope
掏槽爆破在采场中部掘沟工艺中的应用
13.
Discussion About Blasting Footage and Cutting Patterns of Circular Tunnel in Supper Hard Rock
圆型隧洞超硬岩爆破进尺与掏槽方式探讨
14.
Design of Combination of Smooth Blasting and Double-wedge Cut for Roadway Excavation
双楔形掏槽方法和光面爆破技术的综合设计
15.
Application of Combined Slotting in Driving Hard Rock Roadway
混合掏槽技术在坚硬岩石巷道掘进中的应用
16.
The loosening holes outside the plough cut are also drilled at an angle which improves the breakage possibility.
在楔形掏槽眼外侧的扩槽眼也要有角度以改善爆破效果。
17.
D. Clean the slots of O-rings, Talfon slots, body spindle and spherical surface intensively.
形环沟槽，铁氟沟槽，主体轴心孔及球面加强清洗。
18.
guttering of porous common pottery
普通多孔陶质料制的雨槽管