1.
Study on Fabrication Technology of Reaction Bonded Silicon Carbide Mirror Blank for Space
空间用反应烧结碳化硅反射镜坯体制备技术研究
2.
Study on Preparation of AlSi7Mg Alloy Semi-solid Billets by Melt Isothermal Treatment Process;
熔体等温处理法制备AlSi7Mg合金半固态坯料的研究
3.
Study on Laser Machining of Green Bodies of Ceramics Prepared by Different Forming Methods
不同成型方法制备陶瓷坯体的激光加工研究
4.
Silicon carbide space-borne mirror was produced by reaction bonded process.
采用反应烧结工艺制备了碳化硅空间用反射镜坯体.
5.
Preparation of Al_2O_(3p)/Al-Cu Matrix Semi-solid Billet
Al_2O_（3p）/Al-Cu基半固态坯料的制备
6.
Preparation of TiC/7075Al Matrix Semi-solid Billet
TiC/7075Al基半固态坯料的制备
7.
New Technology for Preparing Semi-Solid Billets of LC9 Aluminum Alloy
LC9铝合金半固态坯料制备工艺研究
8.
Preparation of Semi-solid AlSi30 Billets by SIMA Method
基于SIMA法的AlSi30合金半固态坯料的制备
9.
Preparation of Aluminum Foam Sandwich Perform by Roll-bonding Process
轧制复合法制备泡沫铝夹心板发泡预制坯
10.
Research on Control of Large Dimension Tubular Production in Spray Deposition;
喷射沉积制备大规格管坯中的控制技术研究
11.
Study on Semisolid Feedstock of A356 by Controlled Pouring Methods;
控制浇注方法制备A356半固态坯料的研究
12.
On the Metal Volume Shaping of the Technology of Metal Mould Casting;
金属制坯技术中的金属体积成形工艺
13.
Preparation of Semi-solid Billet and Reheating of Hypoeutectic Al-Si Alloy;
亚共晶铝硅合金半固态坯料的制备及二次加热
14.
Study on Process of High Speed Steel Ingots Using Inclined Slope Pre-crystallization Method;
斜坡预结晶法制备高速钢坯料的工艺研究
15.
Fabrication of NiTi Alloy Tube with Hot Extrusion and Improvement of Its Properties under Environmental Field;
镍钛合金热挤压管坯制备及环境场改性研究
16.
Simulation and Preparation Studies on Continuous Casting of Cladding Aluminum Alloys under Direct Current Magnetic Field
直流磁场下铝合金复层铸坯制备与模拟研究
17.
Study on the Processing Technology of Ternary Rare-Earth Oxides Tungsten Electrodes
大坯条三元复合稀土钨电极的制备工艺研究
18.
Experimental Study on Fabrication of Semisolid Billet of AlSi30 Alloy Based on New SIMA Method
基于新SIMA法的AlSi30合金半固态坯料制备试验研究