1.
The basic mechanism is an air jet supplied by an accurately regulated pressure.
其基本机械结构是一个空气喷嘴，喷嘴压力经过精确调整。
2.
Three Dimensional Numerical Simulation on Single Atomizer Blend Flow Pressure Spray Dryer;
单喷嘴混流压力式喷雾干燥塔三维数值模拟
3.
Measure Methods of Spray Distribution in Radial Direction of Pressure Atomization Nozzle
压力式雾化喷嘴径向喷淋密度的测量方法
4.
Experimental Study of Hydrajet Nozzle on Abrasion
水力喷砂射孔压裂喷嘴的损伤试验与分析
5.
CFD Analysis for Effect of Injection Pressure Fluctuation on Cavitating Flow in Diesel Engine Nozzle
喷油压力波动对喷嘴内空穴发展影响的CFD分析
6.
high pressure nozzle spray drier
高压喷嘴式喷雾干燥机
7.
P It consists of the bottom, pressure gauge, handle and nozzle, etc.
警它由底痤、压力表、压把、喷嘴等几部分构成。
8.
A high-velocity fluid stream forced under pressure out of a small-diameter opening or nozzle.
喷射流体在压力迫使下从小喷嘴或小孔中喷出的高速流体
9.
Study on the Bottom Hole Pressure Properties of the Oscillating Pulse Jet-Nozzled Bit
振荡脉冲射流喷嘴钻头井底压力特性研究
10.
Research on External Flow Field of Pressure Swirling Nozzles under Different Wind Speeds
轴流风速下压力旋流喷嘴外流场特性研究
11.
Analysis of Calculation Model for Spray Characteristics of Pressure Swirl Nozzles
压力涡流喷嘴雾化特性模拟的双相流模型分析
12.
Reduce pressure. Use a larger nozzle. Hold spray gun closer to the surface. Spray at right angles to the surface.
改变压力。使用大一点的喷嘴。加近喷枪与底材的距离。调整高度。
13.
Experimental Research on Atomization Characteristics of Pressure Nozzle and Numerical Simulation on Heat and Mass Transfer in Spray-Dryer;
压力式喷嘴雾化特性实验研究及喷雾干燥热质传递特性数值模拟
14.
Simulative Research with the Impact on the Injection Rule of Rail Pressure Fluctuations in High-pressure Common-rail System
压力波动对喷嘴内流场及喷油规律影响的仿真研究
15.
Experimental Investigation and Statistical Analysis of the Pressur Atomizing Nozzle on a Heavy Gas Turbine
某重型燃气轮机压力雾化喷嘴性能试验研究及统计分析
16.
Study on Status of Force Acting on VNT Guide Vanes Under Different Engine Working Conditions
内燃机增压器可调涡轮喷嘴环叶片受力状态研究
17.
Investigation on pressure oscillation propagation from combustion chamber to pipeline through injector
由喷嘴连接的燃烧室到供应系统压力振荡传递过程研究
18.
ISA 1932 nozzle
ISA 1932喷嘴