1.
specified percentage decarburation
规定脱碳率的脱碳层厚度
2.
The relationship between the thickness of decarbonic layer of metal spring and the temperature and time heated;
金属弹簧脱碳层厚度与受热温度和时间的关系
3.
Model for the distribution of carburized case depth of spur gear in warm forming after car burizing
直齿轮“渗碳-温挤”渗碳层厚度分布模型
4.
Trail Production of Large Thickness Composites Laminate of Carbon Fiber
大厚度碳纤维复合材料层压板的试制
5.
Diameter Tolerance, Ovality and Average Decarburized Layer Depth
直径公差，偏圆度及脱碳层的平均深度
6.
Sim? ilarly, an increase in case depth, particularly uneven case depth in case hardening steels, increases warpage on quenching.
与此类似，渗碳层厚度越大，特别是对于渗碳层厚度不一的渗碳用钢，淬火时更易产生翘曲。
7.
Permissible depth of flaw and decarburized layer
裂纹之容许深度及脱碳层
8.
Determination of depth of decarborization of steel
GB/T224-1987钢的脱碳层深度测定法
9.
Effects of Coating Layer Thickness on Surface C Content in Carbon Steel Casting in EPC
涂层厚度对气化模铸钢件表面含碳量的影响
10.
Realizing Study of the Current Control Influencing the Carbon Deposition of Electrode
影响电极积碳层厚度的电流控制实现研究
11.
RESEARCH ON CHANGE LAW OF DEPTH OF DECARBURIZATION LAYER ON SURFACE OF WIRE BAR
对线材表面脱碳层深度变化规律的研究
12.
Corrosion layer of bronze relics consisted of red cuprite sub-layer, green carbonate mineral sub-layer and yellow stannolite sub-layer.
腐蚀层细分为红色赤铜矿层、绿色碳酸盐矿物层和黄色锡石层组成,其厚度小于1mm。
13.
Effect of Composition and Grain Size of Ti(C,N) on the Cobalt-rich Layer ofGradient Cemented Carbide
Ti(C,N)的碳氮比及粒度对脱β层梯度硬质合金的影响
14.
There was ten tenths cloud at that time.
当时云层厚度是十度。
15.
having a thickness made up of two layers or strands.
有两层或两股厚度的。
16.
having a thickness made up of four layers or strands.
有四层或四股厚度的。
17.
having a thickness made up of three layers or strands.
有三层或三股厚度的。
18.
pipe concrete coating thickness
管子混凝土加重层厚度