1.
Analysis of Positioning and Clamping for Workpiece in Machining Center
工件在加工中心上的定位与夹紧分析
2.
clamp A and B(together);clamp A to B ;fasten (one thing to another)with a clamp
用夹具将（一物与另一物）夹紧,固定住
3.
The clamps should be stable, the clamping force should be in normal direction to the support surface.
5夹紧器要稳定可靠，夹紧方向按定位面法线方向。
4.
Device Reformation and Practice of Positioning and Clamping for Transmission Box Body on Assembly Line
装配线上变速器箱体定位夹紧机构的改进与实践
5.
Using the advanced inside chucking system, it is fixed firmly, easy to assemble or disassemble, has high position accuracy.
采用先进的内夹紧装置，夹紧牢固，装卸方便，定位准确。
6.
Simultaneous Optimization of Fixture Layout and the Application Sequences and Analysis of Stability;
夹紧顺序与夹具布局的同步优化及稳定性分析
7.
Each datum, location pins, the number of the clamp sequence, check pin's name, the value of gap and tolerance need mark on checking fixture.
定位面，定位销，夹紧顺序，孔位测量销，模拟块偏置值及公差需有标识。
8.
Study on the positioning and clamping of tractor transmission box on assembly line
拖拉机变速器装配线上箱体的定位夹紧研究
9.
Clinical study on molded and straight splint fixation after handed-replacement for Colles fracture
手法复位后塑形夹板与直形夹板固定治疗Colles骨折的临床观察
10.
Grip: White space needed at the fees edge of a sheet to permit it to be gripped by the grippers on a printing machine.Also called Gripper allowance,Gripper margin.
夹牙白边:前纸边上所需的空白位，以容许印刷机上的夹牙将纸夹紧。
11.
Four boundary conditions, such as fixed clamp, moving clamp, hinge support and simple support, are considered.
文中考虑了固定夹紧、移夹紧、支承及简单支承等4种边界条件.
12.
Snap molding down over top of retaining clips.
向下压紧嵌条至固定夹上方。
13.
Pressure Setting of Press-keeping Clamping Circuit Based on Accumulator
基于蓄能器保压夹紧回路的压力设定
14.
The location you specified does not support the selected folder type. Specify a different location or contact your system administrator.
您所指定的位置不支持选定的文件夹类型。请指定另外的文件夹类型或与您的系统管理员联系。
15.
The Simultaneous Optimization of Fixture Layout and the Clamping Sequences for Weak Stiffness Workpiece
弱刚度工件夹紧顺序与夹具布局的同步优化
16.
emergency locator radio transmitter
紧急定位无线电信标
17.
tautline position-reference system
紧绳监测定位标准系统
18.
steering gear column clamp
转向齿轮柱夹紧夹子