1.
Study on one step injection forming machine of screw pump stator lining
螺杆泵定子衬套一步法注射成型机的研究
2.
Force-thermal coupling analysis numerical simulation for a double-helix single screw pump bush
双头单螺杆泵衬套力热耦合模拟研究
3.
Kinetic Analysis and Simulation of Multi-Lobe Progressing Cavity Pump
多头螺杆泵定转子空间曲面的形成及螺杆泵运动学仿真
4.
Loosen but do not fully remove the four bolts that attach the stabilizer bar bushing retainers to the rear axle brackets.
松开但不完全拆卸接合稳定杆衬套扣环与后车轴支架的4支螺栓。
5.
Parameter Modeling of Rotor and Stator of Multiple Single Screw Pump
多头单螺杆泵转子和定子的参数化建模
6.
The Application of Screw Pumps in Directional Wells and the Technology Research on Annulus Test
定向井中螺杆泵及螺杆泵环空测试技术研究
7.
The Life of Screw Pump Stator Used in Pumping Emulsion Explosive
乳化炸药基质输送螺杆泵定子寿命研究
8.
Technology and application of oil production by ground driven screw pump
地面驱动螺杆泵采油配套技术及应用
9.
Numerical Control Manufacture Technique and Equipments Research about Stator of the Screw Pump;
螺杆泵定子内螺旋曲面数控制造技术及装备研究
10.
Align the bushing with the spring eye or shackle eye and tighten the nut at the socket wrench end of the threaded roTighten until the bushing is forced into the spring eye.
将衬套对准弹簧眼或U型钩眼，并在螺纹杆的套筒板手末端锁紧螺帽。锁紧直到衬套进入簧眼。
11.
The Design and Research of the Three Stations Vertical Injection Equipment for Rubber Stator of Screw Drill and Screw Pump and Simulation of 3D Dynamic Process;
螺杆钻具和螺杆泵橡胶定子的三工位立式注射成型设备的设计研究与三维动态模拟
12.
Study and Application of Screw Pump and Its Matching Technology;
螺杆泵采油工艺及其配套技术的研究与应用
13.
Determination of the Growd Driving Auger Stem Pump Working System
地面驱动采油螺杆泵工作制度的确定
14.
hoist pump drive shaft bushing
起重机油泵传动轴衬套
15.
shock absorber eye bolt sleeve
减震器有眼螺栓衬套
16.
reaming and pushing machine for piston connecting rod bush
活塞连杆衬套铰压机
17.
Our factory take the processing screw rotor as startinr points, developed the type of screw pump, screw spindle compressor, screw freezer.
我厂以螺杆转子加工制造备件起点，开发螺杆泵系列产品，螺杆式压缩机、冻机主机。
18.
Study of Design and Performance of the Rotors Curve of Dry-running Twin-screw Vacuum Pumps;
双螺杆真空泵转子型线设计与仿真研究