1.
In order to restoring and improving applied property of cold-rolling stainless steel strip most probably, the best heat treatment process was established by means of studying the transforming of micro-organization of stainless steel while heated or cooled.
通过分析冷轧不锈带钢组织形态随温度的变化来确定最佳热处理工艺，以恢复并尽可能提高其性能。
2.
Study on gasification wastewater treatment by SBR process
SBR工艺处理煤气废水的最佳运行参数研究
3.
The mechanical properties and the whiteness of the finished silk fabric were tested.
用正交分析法对整理工艺进行优化，得出最佳处理工艺。
4.
The Experimental Study on Damp and Hot Buckwheat Drying Technology and Optimum Parameters;
湿热荞麦干燥工艺及最佳工艺参数的试验研究
5.
Optimal Conditions of Magnesium Ammonium Phosphate Precipitation Process for the Treatment of High Strength Ammonium Nitrogen in Old Landfill Leachate
磷酸氨镁法处理晚期垃圾渗滤液氨氮最佳工艺条件
6.
unconventional heat treatment of mould
模具非常规热处理工艺
7.
X20CrMoV121 Fan Plate Heat Treatment Process
X20CrMoV121扇形板热处理工艺
8.
Investigation of Steel 15CrNi3MoA Heat Treatment Process
15CrNi3MoA钢热处理工艺探讨
9.
The process for the treatment of the waste acid from crude benzol refining with calcining process is studied, the optimum operation data are discussed and the process is optimized.
研究了焙烧法处理粗苯精制废酸的工艺过程,探讨了最佳运行参数,优化了工艺流程。
10.
An Experimental Study on Lycium Hot Air Drying Characteristic and Optimum Technology;
枸杞热风干燥特性及最佳工艺的试验研究
11.
Find proper scal and corrosion inhibitor for water boiler based on practice and experiment
创新实践追求最佳热水锅炉锅内水处理技术
12.
The Effect of Heat Treatment Technics on the Thermal Fatigue Property of 3Cr2W8V Steel;
热处理工艺对3Cr2W8V钢热疲劳性能的影响
13.
Research of Heat Treament Process Dies Steel;
热作模具钢二次回火热处理工艺研究
14.
Heat Treatment Process for 23-8N Austenitic Heat Resistant Steel
23-8N奥氏体耐热钢热处理工艺研究
15.
Improvement on Heat Treatment of 5CrMnMo Steel Hot Forging Dies
5CrMnMo钢制热锻模热处理工艺改进
16.
Improvement on heat treatment process of hot forging die for diesel camshaft
柴油机凸轮轴热锻模热处理工艺改进
17.
Heat Treatment of H13 Hot Working Die Steel for Die Casting
压铸用H13热作模具钢热处理工艺研究
18.
Heat Treatment of Hot Formed Bend in Low-carbon Steel X52
低碳钢X52热煨弯管的热处理工艺