1.
Deep groove ball bearings mainly take radial load as well as take moderate axial load.
深沟球轴承主要承受径向载荷，也可承受一定量的轴向载荷。
2.
Tapered roller bearings are generally used to support combined load mainly consisting of radial load.
圆锥滚子轴承主要用以承受以径向载荷为主的径向与轴向联合载荷。
3.
Taper roller bearings are generally used to support combined load mainly consisting of radial load.
详细信息:圆锥滚子轴承主要用以承受径向载荷为主的径向与轴向联合载荷。
4.
The effect of radial load to radial stiffness can be neglected.
径向载荷的变化对轴承径向刚度的影响可以忽略.
5.
Nonlinear Finite Element Analysis and Optimization of Hydraulic Cylinder Enduring Axial Loads and Radial Loads
液压缸承受轴向与径向载荷的非线性有限元分析与优化
6.
Evaluation of Uncertain Degree for Radial Force Display Error of Radial Load Fatigue Test Machine for Vehicle Wheels
车轮径向载荷疲劳试验机径向加载力示值误差的测量不确定度评定
7.
Four row circular cone roller bearings its performance and double row circular cone roller bearings basic same, but may withstand the bigger radial direction load and the two axle to the load.
四列圆锥滚子轴承其性能与双列圆锥滚子轴承基本相同，但可承受更大的径向载荷和双轴向载荷。
8.
Plain Bearing Block Housings are made up of cap, base ,aluminum bronze bushing and installing bolts, which mainly bear radial load.
滑动轴承座由上盖、底座、剖分轴瓦（铝青铜），安装螺栓组成，主要承受径向载荷。
9.
A Study on Bearing Behavior of Large Diameter Pile under Vertical Load;
大直径桩竖向荷载作用下承载性能理论分析
10.
Theoretical and Application Research on Load Transfer of Vertically Loading Large Diameter Piles;
竖向荷载作用下大直径桩的荷载传递理论及应用研究
11.
Behaviour of Piled Rafts with Piles of Different Lengths and Diameters under Vertical Loading
竖向荷载作用下不同长度和直径桩的桩筏分析
12.
Research and Application of Lateral Load Distribution Factor Calculating Method for Small and Medium-span Bridges
中小跨径桥梁荷载横向分布系数计算方法的研究及其应用
13.
Study on the thermal insulation transient process of radial sliding bearing under the turbulence of stepped loading
阶跃载荷扰动下径向滑动轴承绝热瞬态过程研究
14.
Mathematical Optimization Model for Embedded Large-Diameter Cylindrical Shell Structure under Lateral Loads
横向荷载作用下插入式大直径圆柱壳结构的优化数学模型
15.
The loads for which a building must be designed may be classified into dead loads,vertical live loads,and lateral live loads.
设计建筑物必须考虑的荷载可分为恒载、竖直活荷载和侧向活荷载。
16.
The loading translation of screw pile on pullout test under inclined loading
斜向荷载抗拔螺旋桩桩土荷载传递特性试验
17.
Analysis of Estimating Ultimate Loading and Static Test of Screw Pile Under Inclined Loading
承压螺旋桩斜向荷载试验与极限荷载判定分析
18.
DETERMINING OF THE FOURK-SIDES NON-FIXED RECTANGLE PLATE'S EQUIVALENT UNIFORM DISTRUBUTED LOAD IN THE CONCENTRATED LOADS
集中荷载作用下双向板等效荷载的确定