1.
NOTCHED TENSILE PROPERTY OF SHORT GLASS FIBER REINFORCED PA6
短切玻纤增强尼龙6的缺口拉伸性能
2.
Brittle-Ductile Transition of PA6/POE-g-MAH Blends in Notched Tensile and Notched Impact Tests
PA6/POE-g-MAH共混物在缺口冲击与缺口拉伸实验中的脆韧转变
3.
The Unified Model and Fracture Criterion of Annular Breach Bar in Tension
环形缺口拉伸圆杆的统一模型和断裂准则
4.
SINGLE NOTCHED TENSILE FRACTURE OF PA6/CaCO_3 COMPOSITE
PA6/CaCO_3复合材料的单边缺口拉伸断裂研究
5.
The Tension and Creep Behavior of Notched 2D-C/SiC;
2D-C/SiC缺口试样的拉伸及蠕变行为
6.
Design of Progressive Die with Side Notching and Horizontal Blanking for Drawing Part
侧冲缺口-横向冲切落料拉伸级进模
7.
Effect of specimen geometry on tensile fracture of notch specimen of pure aluminum
纯铝试样厚度与缺口深度对拉伸破坏的影响
8.
The tesile fracture is mixture of quasicleavage and touph dimple.
拉伸断口为韧窝和准解理混合断裂。
9.
Analysis on the Reason for Tensile Fracture Stratification of Q345 Plate
Q345钢板拉伸断口分层原因分析
10.
The microstructure and tensile fracture surface of the Q235 steel has been investigated by TEM and SEM.
应用TEM和SEM观察钢的微观组织结构及拉伸断口。
11.
ADVANCES IN BIAXIAL ORIENTED POLYMER TUBES BY DIE DRAWING
口模拉伸成型法生产双轴取向管的研究进展
12.
INTERLAMINAR TENSILE RUPTURE AND FRACTURE ANALYSIS FOR CF/EPOXY MATERIALS
碳/环氧复合材料层间拉伸断裂与断口分析
13.
DYNAMIC MECHANICAL BEHAVIOR OF COPOLYMERIZED HDPE BY DIE DRAWING PROCESS
口模拉伸共聚高密度聚乙烯的动态力学分析
14.
The fracture of composites assumes toughness dimple.
复合材料的拉伸断口为解理与韧窝混合断裂.
15.
Study on Lamination Cracks of Low-alloy High Strength Steel Plat
低合金高强度钢板拉伸断口分层机理分析研究
16.
The uniaxial elongational property and the extrusion swell through a long die for the IUPAC-LDPE melt
IUPAC-LDPE熔体的单轴拉伸特性和长口模挤出胀大
17.
The Reason Analysis for Abnormal Fracture in Cold Bending and Stretching of 510L Automobile Crossbeam Steel
510L汽车大梁钢冷弯、拉伸异常断口原因分析
18.
Tensile Fracture Morphology of As-cast 7005 Aluminum Alloy Produced by Electrolytic Liquid Al
电解铝液制备的7005铝合金铸态拉伸断口分析