1.
FE Simulating and Technics for Forming of Large Thick Cylinder;
大型厚壁筒体成形工艺及有限元模拟
2.
The Analytical Solutions of Concrete Thick-walled Cylinder with a Gradient Dependent Damage Model;
混凝土厚壁筒梯度依赖损伤模型解析解
3.
Study of Thermal Stress Distribution on Thick Wall Cylinder by Thermal Shock Treatment;
厚壁圆筒热冲击作用下应力分布研究
4.
Analysis on Thickness of Pressure-lubricating Deep Drawing of Magnesium Alloy Cylindrical Cups
镁合金筒形件压力润滑拉深壁厚分析
5.
Cylinder Wall Thickness Calculation in A-317 of ASME Code Section Ⅰ Power Boilers (2007 Edition)
ASME CODEI卷中圆筒体壁厚的计算式
6.
The Optimum Autofrettage Analysis of Thick-Walled Cylinder of the Material of Different Tension and Compression;
拉压异性材料厚壁圆筒的最佳自增强分析
7.
Study on the Thickness Calculation Method of Viscoelastic Materials Cylinder Liquid Tank
圆筒形黏弹性材料液体储罐壁厚计算方法研究
8.
Slippery Mold Construct of Internal Shaft Lining in Freezing Shaft on Large Sectio Thick Surface Soil
大断面深厚表土层冻结井筒内层井壁滑模施工
9.
FEM analysis of pressing material installment axial compressive loads cylinder of sintering machine
烧结机压料装置中轴压厚壁圆筒有限元分析
10.
Fabrication Technology of the Shell Which Owning Very Thick and Super Diameter for HPHT Fly Ash Filter
高温高压飞灰过滤器厚壁大直径筒节的制造
11.
The side of the bridge or division between cells on a gravure cylinder or the thickness of material on a base cylinder shell.
中义凹版辊筒墨坑间的间隔的侧壁或在辊筒上物体的厚度。
12.
By solving an inverse heat conduction problem, one method is given about to compute wall thickness of cylinder-shaped equipment based on the outer surface tempereture.
利用红外测温技术，结合导热反问题求解，给出了一种根据圆筒外壁温度计算筒壁厚的方法。
13.
Fatigue experiment of thick-walled cylinders under 3500kg/cm2 superpressure and autofrettage
3500公斤/厘米~2超高压厚壁圆筒的疲劳试验与自紧
14.
Simplification of Frequency Equation of Multilayered Cylinders and Some Recursion Formulae of Bessel Functions
多层厚壁圆筒频率方程的简化及一类贝塞尔函数递推公式
15.
Experiment and Production of Heavy Thick-walled Winding Barrel Casting for Crane with Spheroidal Graphite Cast Iron
大型厚壁球墨铸铁起重机卷筒铸件的试验与生产
16.
Theoretical and Experimental Investigations for the First-Order and Second-Order Mechanical Autofrettage Technique of Thick-Walled Cylinders;
厚壁圆筒一次和二次机械自紧技术的理论与实验研究
17.
Plastic Limit Loading Analyses of Thick-Walled Tube Based on Twin Shear Unified Strength Theory;
基于双剪统一强度理论的厚壁圆筒的塑性极限载荷分析
18.
Autofrettage Analysis of Thick Walled Cylinder of Material with Different Yield Strength in Tension and Compression Based on the Unified Strength Theory;
基于统一强度理论的拉压异性材料厚壁圆筒的自增强分析