1.
The main wear mechanisms are adhesion, diffusion and fatigue.
磨损机理主要是粘结磨损、扩散磨损以及疲劳磨损。
2.
Fatigue Wear Analysis of the Friction Couple of SiC and ZrO_2 Ceramics by Finite Element Method
SiC与ZrO_2摩擦副疲劳磨损的有限元分析
3.
The Fatigue Wear and Wear-resistance of EDM Layer of Cold Stamping Die
冷冲模电火花加工层的疲劳磨损与耐磨性
4.
The bulk deformation, fatigue and plough were the major wearing mechanism.
结果表明:合金的主要磨损机制是体积塑性变形、沟效应和疲劳磨损。
5.
Fatigue abrasion Behavior of Laser Coating under Repeated Impact Load
激光熔覆厚涂层的多冲碰撞疲劳磨损行为
6.
These three kinds of debris indicate that the wear between liner and piston is a composite form of fatigue wear, adhesive wear and abrasive wear.
这三种磨屑的存在表明这对摩擦副间的磨损是疲劳磨损、粘着磨损及磨粒磨损等所形成的综合磨损。
7.
Study of Copper-matrix Friction Materials by Powder Metallurgy and Its High Temperature Fatique Wear Properties and Dynamic Behaviors;
铜基粉末冶金摩擦材料研制及其高温疲劳磨损和冲击性能研究
8.
Contact Stress and Fatigue Wear Failure Analysis of Medium-sized CNG Engine Cam/Tappet;
中型CNG发动机凸轮/挺柱接触应力与疲劳磨损失效分析
9.
Development of the Intelligent Measurement and Control System for the JPM-1 Contact-fatigue Tribometer;
JPM-1型接触疲劳磨损试验机智能化测控系统的研究
10.
The cutting tool was characterized by intercrystalline fracture attributed to fatigue and partial cleavage fracture in the machining process.
聚晶金刚石刀具在加工过程中的磨损机理主要表现为具有疲劳磨损特征的沿晶断裂及局部解理断裂.
11.
Impact Fatigue Resistance and Abrasiveness of Cross Rolled Medium Chromium Semi Steel for Grinding Ball
斜轧中铬半钢磨球的冲击疲劳和磨损性
12.
Contrast Study on Roller Friction and Wearing Conditional Fatigue Life;
轧辊材料摩擦磨损条件疲劳寿命的对比研究
13.
Study on Coupling Relation between Rolling Fatigue Crack and Wear of Rail
钢轨滚动疲劳裂纹与磨损耦合关系研究
14.
Study Impact of Abrasion for the Fatigue Life of Shaft by the Analytical Hierarchy Process;
应用层次分析法研究磨损对轴类件疲劳寿命的影响
15.
The Effect and Mechanism of the Cermet Additive in Lubricating Oil on Contact Fatigue and Sliding Wear Performance of Steel/Steel Friction Pair;
陶瓷添加剂对钢/钢接触疲劳及滑动磨损性能的影响及机理研究
16.
Study on Coupling Relationship between Rolling Contact Fatigue and Wear of Wheel-Rail and Prevention Measures;
轮轨滚动接触疲劳与磨损耦合关系及预防措施研究
17.
WC coatings as candidate to hard chrome plating:characterization of fatigue and friction and wear
超音速火焰喷涂WC涂层替代电镀硬铬:疲劳和摩擦磨损性能
18.
This paper analyzes the fracture of flsh-plate and presents that the mechanism of the fracture is fretting fatigue.
本文通过对鱼尾板断裂的分析，表明鱼尾板断裂为微动磨损疲劳机制。