1.
STUDY ON THE SPLITTING TENSILE STRENGTH AND FLEXURAL STRENGTH AND FLEXURAL TOUGHNESS OF STEEL FIBER REINFORCED CONCRETE
钢纤维混凝土劈拉及弯曲强度和韧性研究
2.
Effect of Ce added to 5CrNiMo steel on its strength and toughness and estimation of its low cyclic fatigue life
添加Ce对5CrNiMo钢强度和韧性的影响及低周疲劳寿命的估算
3.
Studies on Mechanical Strength and Degradation in Vitro of Silk Matrix for Tissue Engineered Ligaments;
丝状支架韧带材料机械强度和体外降解性研究
4.
The yield strength, tensile strength and impact toughness of the material after iron plated do not obviously reduce.
镀铁后材料的屈服强度、拉强度和冲击韧性值未发生明显下降。
5.
Compared to tear resistance and tensile strength, fracture toughness is more dependent on fiber length.
断裂韧性对纤维长度的依赖性比撕裂和抗张强度大。
6.
Effect of Heat Treatments on the Intensity and Fracture Toughness of 7A04 Ultra-High Strength Aluminum Alloys;
热处理对7A04超高强铝合金强度和断裂韧性的影响
7.
Development of high toughness and super-high strength zinc electro-plating steel wire for rope
强韧性特高强度镀锌制绳钢丝的研制
8.
Impact of Tempering Temperature on Fracture Toughness of High Tenacious Steel(GDL-1)
回火温度对GDL-1高强韧新材料断裂韧性的影响
9.
The result showed that they have good properties that toughening and reinforcing can be obtained at the same time.
结果表明,纳米材料在聚氯乙烯增韧改性中具有可以同时提高材料的韧性和强度的特点。
10.
The result shows that they have good properties that toughening and reinforcing can be obtained at the same time.
结果表明,纳米复合技术在聚氯乙烯增韧改性中具有可以同时提高材料的韧性和强度的特点。
11.
It has the property of stout, good resistance to damp or water.
它具强韧性和良好的抗水性和防潮性。
12.
The coating has properties of excellent adhesion, good mechanism performance. Good flexibility, good resistance to impact, good abrasion resistance.
具有极强的附着力和优良的机械物理性能，柔韧性好、抗冲击强度高，耐磨性能强。
13.
Strengthening of High Toughness Value Mg-Al-Zn Alloy and the Research of Its Microstructure and Mechanical Properties;
高韧度Mg-Al-Zn合金的强化及显微组织和力学性能研究
14.
Influence of Terminal Forging Temperature and Deformation Ratio on Strength and Toughness of Non-Quenched and Tempered Bainitic Steel
终锻温度和变形量对贝氏体型非调质钢强韧性的影响
15.
Effect of processing parameters on strength and toughness of high-strength steel
工艺参数对高强度钢强度及韧性的影响
16.
POF, economical and practical, has high tenacity, light weight and even thickness.
韧性强,重量轻,厚度均匀,经济实用.
17.
Research on Improving Fracture Toughness of Corrosion Resistanced Ultrahigh-Strength Steel;
提高耐蚀超高强度钢断裂韧性的研究
18.
Effect of Morphology of MnS Inclusions on Toughness of Ultra-High Strength Steel Produced by Different Smelting Processes
MnS形态对超高强度钢韧性的影响