1.
Research on Mechanism and Process of Laser Direct Rapid Forming Metallic Components;
激光直接快速成形金属零件的机理及工艺研究
2.
Research on Mechanical Behavior of Laser Rapid Forming Metal Part;
激光快速成形金属零件力学行为研究
3.
Numerical Simulation and Experimental Study of Metallic Part Rapid Forming Based on Single Track Laser Cladding;
基于单道激光熔覆金属零件快速成形的数值模拟及试验研究
4.
Direct Rapid Forming Study of Metal Parts Based on Micro-plasma Arc Cladding
微束等离子粉末熔覆金属零件直接快速成形研究
5.
Study on Rapid Manufacturing Process of Metal Parts Based on Laser Cladding;
基于激光熔覆的金属零件快速制造工艺研究
6.
Rapid manufacturing of metal parts based on 3D printing
三维打印成形的金属零件快速制造技术
7.
Direct Laser Fabrication of 3-Dimentional Metal Parts Based on Laser Cladding;
基于激光熔覆的三维金属零件激光直接制造技术研究
8.
The Optimization of Processing Parameters and Experimental Investigation on Metal Components Fabricated by Laser Cladding;
激光熔覆成形金属零件的参数优化及实验研究
9.
Study on Processes of Rapid Manufacturing Metal Part and Mould Based on Laser Sintering with Small Power;
基于小功率激光烧结的金属零件/模具快速制造工艺研究
10.
Direct metal forming based on plasma arc welding is a novel rapid prototyping process.
基于等离子弧焊的直接金属成形方法是一种新型的快速成形工艺。
11.
Effects of substrate preheating temperature on microstructures of parts formed by laser metal deposition shaping
基板预热温度对激光金属沉积成形零件微观组织的影响
12.
Research of Slice Algorithm Metal Compound Rapid Prototyping
金属激光复合快速成型切片算法研究
13.
Research on the Precision of Laser Direct Manufacture Superalloy;
激光直接成形高温合金成形精度研究
14.
Surface Laser Finishing Key Technology of Plasma Deposition Direct Manufacturing Metal Prototype;
等离子熔积直接成形金属原型表面激光光整关键技术
15.
Investigation into Manufacturing Metal Parts via Indirect Selective Laser Sintering;
选择性激光烧结间接制造金属零件研究
16.
The Research on 3D-CAD Models Direct Slicing Technique in Laser Rapid Prototyping;
激光快速成形中三维CAD模型直接切片处理技术的研究
17.
This resulted in a rough and bead-shaped surface, obstructing a smooth layer deposition.
球化的出现妨碍了直接金属激光烧结成形的顺利进行。
18.
Study on Direct Selective Laser Sintering of Ni-Based Metallic Powder and Key Technologies;
Ni基金属粉末激光直接烧结成形及关键技术研究