1.
When human has contact to Touch pad, electric charge in the human body will be accumulated through the Touch pad.
当人体接触感应焊盘时，在人体里的电荷将被通过感应焊盘积累。
2.
Time-sharing controlled frequency multiplication of IGBT based 180 kHz/50 kW high frequency induction soldering power supply
倍频分时控制IGBT180kHz/50kW高频感应焊接电源
3.
A Novel Half-bridge Series-resonant High-frequency Induction Welding Power Supply
IGBT半桥串联谐振高频感应焊接电源
4.
Development on High-frequency Induction Brazing Solder of Al/45 Steel
Al/45钢高频感应钎焊焊料的研制
5.
Study on the Post-weld Heat Preservation Technology of Hi-frequency Induction Brazing for PCD Cutting Tools;
PCD刀具高频感应钎焊焊后保温工艺研究
6.
Application of ultrasonic sensor in automatical welding of right-angle welding seam
超声波传感器在直角焊缝自动焊接中的应用
7.
induction or electric machine for melting metal parts
感应或介质电机金属零件焊接用
8.
Why we need an inductive heating machine?
为什么我们需要感应加热设备和焊机？
9.
Temperature Field Analysis of High-frequency Induction Brazing and Experimental Verification;
高频感应钎焊温度场分析与试验研究
10.
Study on the Hi-frequency Induction Brazing of Diamond Tools
金刚石刀具高频感应钎焊工艺的研究
11.
Numerical Calculation of the Magnetic Induction Joule Heat in HFW Pipe Seam
HFW钢管焊缝感应焦耳热的数值计算
12.
The loss of C,B,Si,Cr and other elements in coatings decreases in the order of plasma,autogenous and faradic spraying.
焊层中的C、B、si、Cr等元素烧损率以等离子堆焊最大,火焰喷焊重熔次之,感应熔焊最小;
13.
Research on Controlled System of Heat-treatment of Drill Pipe Joint after Friction Welding Which is Based on PLC Technology;
石油钻杆摩擦焊接头焊后感应热处理PLC闭环控制系统研究
14.
Effect of Flame Normalizing and Induction Normalizing on Properties of U71Mn Rail Joint After Flash Welding
U71Mn钢轨闪光焊焊后火焰正火与感应正火接头性能对比
15.
Study on the Interfacial Reaction and Reliablity of Solder Bumps Reflowed by Induction Heating
感应加热重熔焊点界面反应及可靠性研究
16.
Simulation of Relieving Welding Residual Stresses in the Girth-weld Stainless Steel Tube by Induction Heating Method
感应加热消除不锈钢管焊接应力数值模拟
17.
How to improve the reliability of inductive heating & welding machines?
如何来提高感应加热设备和焊机的可靠性？
18.
How to build inductive heating &welding machines step by step?
如何一步一步的来设计感应加热设备和焊机？