1.
Experiment and Numerical Simulation of Laser Quench on Die Blade
模具刃口的激光淬火试验与数值模拟
2.
Finite Element Simulation of Influence of Tool Edge Radius in Micro-milling
微铣削加工刀具刃口半径影响的有限元模拟
3.
EDG Technology of PCD Tool with Internal Cutting Edges
内凹刃口PCD刀具电火花刃磨工艺
4.
Relationship between microstructure and properties and failure mechanism of knife-edge with small angle
薄刃刀具刃口失效机制与材料组织性能的关系
5.
As the tool softens due to heat, it wears and Breaks down at the cutting edge or face.
在刃口因高温而软化的同时,刀具刃口便开始磨耗并损坏。
6.
He could make a tool with a sharp edge for cutting.
人能用青铜做成一种刃口锋利的切削工具。
7.
A Cutting Model under the Influence of Cutting Edge Roundness in 0rthogonal Metal Cutting
一个考虑刀具切削刃钝圆影响的正交切削模型
8.
As a tool cuts, high heat is developed as a result of compression and friction at the cutting edge of the tool.
当刀具进行切削时,刀具刃口处的压力和摩擦导致了高热。
9.
The cutting edge radius of the tools is minimized less than0.05μ m and the radius waviness of the tools is improved no more than0.2μ m.
刃磨出的金刚石刀具刃口半径值可以达到0.05μ以下，刀尖圆弧圈度提高到0.2μ以内。
10.
A single-point tool has only one cutting edge, while a multiple-point tool has two or more cutting edges.
单刃刀具只有一个切削刃，而多刃刀具有两个或两个以上的切削刃。
11.
The flat-edged cutting part of a sharpened weapon or tool.
刀刃削磨用的武器或工具的刀口处用来切割的部分
12.
A cutting tool is wear-resistant if it resists abrasion at the cutting edge and along the tool face. Wear resistance improves as cutting tool hardness increases.
如果切削刀具的刃口和刀面耐磨,刀具就不易磨损。切削刀具的硬度越高,耐磨性就越好。
13.
To blunt or dull(the edge of a cutting instrument).
弄钝，弄卷刃（切割工具的刃）
14.
To function as a sharp-edged instrument.
用作利刃起有利刃的工具的作用
15.
Finite Element Analysis of the Influence of Cutting Edge Radius on the Size Effect in Micro Cutting
刀具切削刃钝圆对微细切削加工尺寸效应影响的有限元模拟研究
16.
bench universal tool cutter grinder
台式万能刀具刃磨床
17.
The size accuracy of punching workpiece mainly depends on the cutting edge sizes, tolerances of convex die and concave die.
冲裁件的尺寸精度取决于凸、模的刃口尺寸及公差。
18.
Finite Element Metehod Simulation and Experimental Research on Fine Blanking Process with Tool of Stepped Edges;
阶梯形刃口精密冲裁过程有限元模拟及实验研究