1.
Study on Influence of Hydrophilic Modification of TiO_2 Powder on Film Performance of Strippable Coatings
TiO_2粉体亲水处理及对可剥离涂料膜体性能影响的研究
2.
sprayable and strippable protective plastic coatings
塑料防剥离用喷射涂层剥取
3.
Studies on Cathodic Disbondment of Base Coatings for Ambient Curable Fluoro-carbon Coating;
常温固化含氟涂料配套底涂料耐阴极剥离性能的研究
4.
The paint on the wall has peeled off.
墙上涂料已剥落了。
5.
Technological Properties and the Peeling Ability of Water-base Bauxite Coating for EPC(Expandable Pattern Casting)
水基铝矾土消失模涂料工艺性能及易剥离性的研究
6.
This paper introduces the process of the overlay way ofconduction electricity plastic.
介绍了可剥性导电塑料的配方、造工艺及涂敷方法。
7.
Study on Semi-conductive Insulation Shielding Material of Strippable Crosslinked EVA
可剥离交联型EVA半导电绝缘屏蔽料的研制
8.
The warm-up device can reduce the temperature difference between the cloth and the molten film, so it improve the intensity of antis tripping, reduce the gaffer of the film.
预热装置缩小了材料和熔融薄膜的温度差，保证了涂覆后抗剥离强度高，减轻涂覆后的皱褶。
9.
The Separation Methods between Coating Agent and Fabric from Coated Fabric and the Investigation on Its Component;
涂层织物中涂层剂与基布剥离方法和成分分析的研究
10.
Research on Coating Process for Cold-mould of Centrifugal Casting Cast Iron Roller
离心铸铁轧辊冷型涂料涂敷工艺研究
11.
STUDY ON MECHANICAL PROPERTY OF EXFOLIATED SILICONE RUBBER/CLAY NANOCOMPOSITES
剥离型硅橡胶/黏土纳米复合材料研究
12.
DEBONDING MODEL OF FRP-TO-BRICK INTERFACE
纤维增强复合材料与砖界面剥离模型
13.
after exploration has determined that the deposit can be mined from the surface, the overburden must be stripped off first. Different stripping methods are used according to the nature of the material to be removed.
在探明了矿床可露天开采后，首先必须剥离覆盖层。根据剥离物的性质，可采用不同的剥离方法。
14.
Test method for peel force of flexible laminated plastics
GB/T8808-1988软质复合塑料材料剥离试验方法
15.
Intercalated or exfoliated nanocomposites can be prepared by melt-intercalation and in-situ coordination polymerization.
熔融混合和原位聚合两种方法可用以制备插层或剥离态的纳米复合材料。
16.
For example, relatively soft material, such as soil, gravel, loose or weak rock, can be removed by digging.
例如，像土壤、砾石和松石那样的松软剥离物，可挖掘剥离。
17.
The Electronic Stripping Tester's Design and Analysis of the Reliability;
电子剥离试验机的研制和可靠性分析
18.
Study on Nanocrystalline TiN Coatings Materials Prepared by the Reactive Plasma Spraying;
反应等离子喷涂纳米TiN涂层材料的研究