1.
Structure and Properties of C/SiC Friction Material Made by Reactive Melt Infiltration;
反应熔体浸渗法制备C/SiC摩阻材料的结构与性能
2.
liquid infiltration
液体渗入，液体浸油
3.
Effect of Silicon Carbide Powder on Preparation of C_f/SiC Composites by Molten Silicon Infiltration
碳化硅粉体对熔融渗硅法制备C_f/SiC复合材料结构的影响
4.
Influence of Impervious Body of Dam Foundation on Saturation Line and Seepage
土坝坝基防渗体对浸润线和渗流量的影响分析
5.
Manufacturing TiC/Ni_3Al Composites by Using Pressureless Melt Infiltration Processing
无压熔渗法制备TiC/Ni_3Al复合材料的渗入工艺研究
6.
STUDY ON PROCESS OF PREPARING A12O3/A1 BY THE PRESSURELESS INFILTRATION TECHNIQUE;
熔渗法制备Al_2O_3/Al复合材料工艺研究
7.
Preparation of SiC/MoSi_2 Coating with Reactive Melt Infiltration
熔渗法制备SiC/MoSi_2涂层的研究
8.
Study of AgW(75) Electrical Contact Material With Infiltration Technology
熔渗法AgW(75)触头材料研究
9.
Preparation of W/ZrC Composites by Reactive Melt Penetration
W/ZrC复合材料的反应熔渗法制备
10.
THE PREPARATION OF MODERATE-TEMPERATURE CURING EPOXY RESINS USED AS HOT-MELT PREPREG
热熔预浸料用中温固化环氧树脂体系的制备
11.
Preparation of Cyanate Ester Resin for Hot Melt Impregnation
适用于热熔法制备预浸料的氰酸酯树脂的制备
12.
The structure/ function integrating aluminium matrix composite was prepared by pressureless infiltration( a new casting technology) and the properties of the composite were tested in this paper.
采用新型铸造-无压浸渗法制备了结构/能一体化铝基复合材料,并对该复合材料进行了性能测试。
13.
Influencing Factors in Molten Aluminum Treating by Elec-flux Process
电熔剂法净化处理铝熔体的影响因素
14.
determination of resistance to liquids:water immersion method
耐液体浸蚀的测定 -第2部分:浸液法
15.
Numerical Simulation of Isothermal Unsaturated Infiltration of Liquid Aluminum into Fiber Preform
液态铝在纤维预制体中非饱和浸渗的数值模拟
16.
Effect of CeF_3 on Manufacturing of TiC/Ni_3Al Composites by Using Pressureless Melt Infiltration Process
CeF_3对无压熔渗法制备TiC/Ni_3Al复合材料的渗入工艺影响
17.
Study on Preparation of Grown Polycrystalline Diamond Compact Using Infiltrating Way;
熔渗法制备生长型金刚石复合片的研究
18.
Phase Composition and Mechanical Properties of B_4C-ZrB_2-Al Composites Prepared by Vacuum Infiltration
B_4C-ZrB_2-Al复合材料的真空熔渗法制备与性能分析