1.
Thermoelectric calculation and technological analysis during melting in vacuum consumable electro-arc furnace
真空自耗电弧炉熔炼时的电热计算与技术分析
2.
Practice of As-cast QT450-15 Nodular Graphite Iron Produced by Electric Arc Furnace Smelting
电弧炉熔炼生产铸态QT450-15球墨铸铁的实践
3.
Heat calculation and analysis were done during the melting in a vacuum consumable electro-arc furnace to obtain the average temperature in the furnace, with the contact resistance relating to the main parts of the furnace calculated and discussed.
通过对真空自耗电弧炉熔炼时的热量计算和分析,得出了炉内平均温度。
4.
The scrap must be carefully selected to contain exactly the right ingredient before it is sent into the electric to be furnaced .
废钢在送进电弧炉熔炼前必须先经过仔细挑选，以保证其成分完全符合要求。
5.
Measures of Increasing Lining Life of EBT EAF for Smelting Stainless Steel
提高熔炼不锈钢电弧炉炉衬寿命的措施
6.
BOTTOM GAS STIRRING AND SMELTING TECHNOLOGY OF DEEP BATH FOR DC EAF
直流电弧炉底吹气体搅拌加深熔池冶炼技术
7.
non-consumable arc-melting process
非自耗电极电弧熔炼法
8.
consumable arc-melting process
自耗电极电弧熔炼法
9.
The electric arc steelmaking process may be divided into the following four stages: charging, melting, refining and tapping.
电弧炉炼钢可以分为以下4个阶段:装料，熔化，精炼和出钢。
10.
Probing Practice in Smelting Foamed Slag by Submerged Arc Process in EAF
电弧炉泡沫渣埋弧冶炼的实践与探讨
11.
RAPID MELTING IN ELECTRIC ARC FURNACE AND VACUUM REFINING OF SPECIAL STEELS
特殊钢的电弧炉快速冶炼和真空精炼
12.
electric furnace for manufacturing, refining or smelting metals
电炉,制造、提炼或熔炼金属用
13.
ectrode cold-mold arc melting
自耗电极水冷坩埚电弧熔炼
14.
INVESTIGATION ON TEMPERATURE DISTRIBUTION IN ELECTRIC ARC FURNACE
炼钢电弧炉炉内温度分布规律的研究
15.
Arc Discharge in the Vacuum Induction Melting and its A voidance
真空感应熔炼中弧光放电及解决办法
16.
VACUUM METALLURGY FACILITY(Ⅲ)-VACUUM ARC FURNANCE
真空冶金装置(三)一真空电弧熔炼
17.
Study on Microstructure and Performance of Cr-Ni-Ti Alloy Prepared by Arc Melting
电弧熔炼Cr-Ni-Ti合金组织与性能研究
18.
The oxygen lances for electric arc furnace steelmaking can be divided into oxygen burning lance and blowing oxygen and burning carbon lance.
电弧炉炼钢用氧枪分为吹氧助熔用氧枪 (氧燃喷枪 )和吹氧烧碳用氧枪两类。