1.
Analysis on quenching cracking of 45~# steel parts and its technological improvement;
45~#钢小工件淬裂原因分析与工艺改进
2.
Subcritical Quenching Technique for 45 Steel May Reduce Quenching Dehiscence Tendency
45钢亚温淬火工艺可减少淬火开裂倾向
3.
Hardening Crack Analysis and Prevention Measurement for 45 SteelWobbling Arm Axis
45钢摆臂轴淬火裂纹分析及防止措施
4.
Analysis on Crack Reason of Working-face of Wheel Surface-quenched by Flame
车轮踏面火焰表面淬火开裂原因初探
5.
TENSILE BEHAVIOR AND FRACTURE CHARACTERISTICS OF STEP-QUENCHED DUAL-PHASE STEEL 20
台阶淬火双相20钢的拉伸行为及断裂特征
6.
Analysis and Research on Universal Grinding Machine s Quench Spliting;
万能工具磨床钳口件淬火开裂的分析与研究
7.
The Measures of Preventing Intermediate Frequency Quenching Cracks in Turnings of ZH110;
ZH110型汽车转向节中频淬火防止开裂的措施
8.
The ceramic layer does not crack or flake off when heated to800℃ and then quenched.
将陶瓷内衬复合钢管加热至800℃温，然后水淬，陶瓷层不炸不裂。
9.
800MPa grade heavy plates with low susceptibility to welding crack produced by direct quenching
直接淬火研制800MPa级低焊接裂纹敏感性高强钢厚板
10.
Meanwhile, the fracture was accelerated due to the uneven surface hardness and the unreasonable distribution of the hardening layer on the crankshaft, and the bad lubrication condition in service.
同时轴左颈表面硬度不均匀、淬硬层分布不甚合理，工作过程中润滑条件差，加速了曲轴的断裂。
11.
surface hardening steel
低淬透性钢, 浅淬硬钢, 表面硬化钢
12.
Steel - Hardenability test by end quenching(Jominy test)??
钢端头淬火的淬透性试验（乔米尼试验）
13.
Process for Controlling Hardenability Characteristic of Gear Steel 22CrMoH
22CrMoH淬透性及窄淬透性带的控制
14.
austemper stressing
等温淬火表面应力;等温淬火前加应力;加工应力等温淬火
15.
The process of cooling is called quench .
这种冷却过程叫做淬硬。
16.
mesh belt conveyor bright quenching furnace
网带输送式光亮淬火炉
17.
complete equipment for high frequency induction quenching
高频感应淬火成套设备
18.
crankshaft journal face hardening machine
曲轴轴颈表面淬火机床