1.
An Analysis of Three Dimentional Deformation of a Round Bar with Oval Cavity and Its Upper Bound Solution
椭圆型槽辊锻圆坯料三维变形的分析及上限解
2.
Constructions of Grooves on the Roll-surface of CMS
连续混炼双辊机辊筒表面凹槽的结构形式
3.
Analysis the Reasons of the Roll Ring Fragmentation and the Roll Ring trough Broken in High Speed Wire Rod Mill & Its Precaution Methods
高线辊环槽裂及辊环破碎原因分析及防止措施
4.
Effect of separating roller structure on solospun yarn property
分割辊槽宽对缆型纱耐磨性能的影响
5.
"The spray-rinsing tank is located on production line, on which the stainless steel working tank, spray pipeline, spray nozzles, support rolls and wringer rolls etc. are mounted."
喷淋槽在生产线中,装有不锈钢的工作槽、喷淋管道、喷嘴、支撑辊和挤压辊等
6.
The technology of precision roll forging by closed die groove of machine driven plough share are researched systematically.
系统研究了机引犁铧闭式型槽精密辊锻技术。
7.
Geometrical Analysis For the Surface Contour of the Die Cavity and Forging in Roll Forging Dies
辊锻模型槽与锻件轮廓曲面的几何分析
8.
Numerical Simulation and Effects of Forming Parameters on Roll Forming for Channel Section;
槽钢辊弯成型的数值模拟及工艺参数研究
9.
Change and Design of Belt Conveyor Chute General Idler Stands
带式输送机导料槽处普通托辊架改造及设计
10.
Impact Analysis of the Ring Slot around the Bearing Shell of Top Rollers on Cot Telescoping Process
上罗拉轴承外壳环形槽对套制胶辊的影响分析
11.
For flat products like plate and strip, plain rolls are used, and grooved rolls are used for the rolling of sections of various shapes.
平轧辊用于轧制扁平产品，如板材和带材，而轧制不同形状断面的产品则要用有槽轧辊。
12.
Ink duct: Part of printing machine which stores and supplies ink to the inking rollers. Also called Ink fountain. Rom Duct.
墨槽:印刷机上贮存油墨和供应墨辊所需墨量的部份。
13.
The design method of groove system and wide extension coefficient formula proposed in the paper are very significant for roll forging design of other similar products.
本文提出的型槽系设计方法及展宽系数公式,对于类似产品辊锻工艺设计有普遍指导意义。
14.
The process of cleaning the rollers, form or plate, and fountain of a press with solvents to remove all ink as required after a day's run, or during a run for ink color changes.
中义在一天工作完毕或更换墨色时，以溶剂清洗辊筒、印版或印刷机的水槽以洗去所残留的印墨。
15.
pressure roller
压紧辊，压实辊，压紧辊轮
16.
Distributing Roller
均布辊; 排肥辊; (涂料)分配辊; (三辊磨的)匀料辊; (印刷)匀墨辊
17.
bend bar expander
弯辊扩幅器,扩幅弯辊
18.
variable crown roll
连续改变辊凸度的轧辊