1.
Research on the Performance of Re-sintering Al_2TiO_5-ZrO_2 Composite Material
再烧结Al_2TiO_5-ZrO_2复合材料的性能研究
2.
Made of shaping Polytetrafluoethylene Resin by moulding in ordinary lemperature then through high heat sintering.
将聚四氟乙烯烧树脂在常温下用模压法成型后再经高温烧结制成。
3.
STUDY ON MODELS OF COKE BURNING REGENERATION FOR FCC COKED CATALYST --Establishment of Mathematical Models for Catalyst Coke Burning Regeneration
催化裂化结焦催化剂烧焦再生模型的研究(Ⅱ)——烧焦再生数学模型的建立
4.
Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.
将聚四氟乙烯树脂在常温下用模压法成型后再经高温烧结制成。
5.
Conclusion: MEBO can promote regenerative healing of diabetic skin ulcer.
结论:美宝湿润烧伤膏可促进糖尿病性皮肤溃疡再生愈合。
6.
afterfiring zone
(带式烧结机的) 后烧段
7.
At this rate, they nick the earth's atmosphere and bounce off into space
得再燃烧引擎推回航道 一定得再烧一次
8.
Study on sintering process of P/M M42 high speed steel prepared by spark plasma sintering
SPS烧结M42粉末高速钢的烧结工艺研究
9.
Strengthen the Control of the Whole Process of Sintering And Keep the Stability of the Quality of Sinter
加强烧结过程控制与稳定烧结矿质量
10.
Opera Ting Practice of 360m~2 Sintering Deep-Bed in an Gang Sintering Plant
烧结厂360m~2烧结机厚料层生产实践
11.
ULTRA-HIGH PRESSURE SINTER NANO-SiC CERAMIC
无烧结助剂SiC陶瓷的高压烧结研究
12.
Made of shaping Polytetrafluoethylene Resin added with a certain volume of extrusion assistant by extrusion than through high heat sintering.
用聚四氟乙烯树脂加入一定量的助挤剂，采用糊膏挤出法成型后，再经高温烧结制成。
13.
Made of pressing Polytetrafluoethylene Resin into various simple shapes of seal in ordinary temperature then through high heat sintering and special treatments.
用聚四氟乙烯树脂在常温下压制各种简单形状的密封件，再经高温烧结后经特殊方法处理制成。
14.
Our numerical simulation reproduced the experimental result of laser ablative Rayleigh-Taylor instability in Osaka University.
数值计算日本大阪大学激光烧蚀瑞利－泰勒不稳定性实验，再现了实验结果。
15.
Application of Φ1 0×9 Fixed Magnetic Series Disc?Type Magnetic Separator?to Magnetic Reseparation of Tailing on Dong Anshan Sintering Works at AISC
Φ1.0×9固定磁系圆盘式磁选机在鞍钢东鞍山烧结厂尾矿再选中的应用
16.
STUDY OF IMPROVEMENT COMPOSITION OF SINTER’GRAIN SIZE IN No2 SINTERING PLANT OF THE XIANGGANG
改善湘钢二烧烧结矿粒度组成的研究
17.
An Experiment of Deep Bed Sintering at East Anshan Sintering Plant of AISC
鞍钢东烧厂烧结配碳和配矿试验研究
18.
Sintering and Mechanical Property of Si_3N_4 with YF_3 Sintering Aid
YF_3助烧剂氮化硅的烧结及力学性能