1.
Study of Welded Pipe Seam Quality Detection and Automatic Elimination of Welded Pipe with Fault in Seam Systems;
平板焊管焊缝质量检测及缺陷焊管自动剔除系统的研究
2.
welding of tube-tubesheet
![点击朗读](/dictall/images/read.gif)
管子与管板氩弧焊接
3.
Quality Control of the Fillet Weld in the Tube and Tube Sheet of Heat Exchanger
![点击朗读](/dictall/images/read.gif)
换热器管-管板角焊缝焊接质量的控制
4.
Steel plate butt-welding pipe fittings
![点击朗读](/dictall/images/read.gif)
GB/T13401-1992钢板制对焊管件
5.
Welding test on the belt built-up welding 304L to the 20MnMo forging pipe-steel
![点击朗读](/dictall/images/read.gif)
20MnMo锻件管板带极堆焊304L的焊接试验
6.
Surfacing on Duplex Stainless Steel Tube-plate of Heat Exchanger and Welding on Tube-port of Heat Exchanging Tube
换热器管板双相不锈钢堆焊及管板与换热管管头焊接
7.
Craft is very good--The welding is laser welding between absorber and tube tanks,and the absorber is only one plate.
工艺精湛——集热板与排管焊接是激光焊接,并且集热板是一整块板.
8.
expanding or welding of tube with tubesheet
![点击朗读](/dictall/images/read.gif)
管子与管板的胀接或焊接
9.
sential variables
![点击朗读](/dictall/images/read.gif)
管子与管板焊接的主要参数
10.
TIG welding for austenitic stainless steel tube plate and copper pipe
![点击朗读](/dictall/images/read.gif)
紫铜换热管与不锈钢管板接头的TIG焊
11.
Research on Welding Process of Duplex Stainless Steel Tube to Tubesheet Made of 316L
![点击朗读](/dictall/images/read.gif)
双相不锈钢换热管与316L管板焊接工艺
12.
The welding technic on the rectifier diode connection for improving reliability.
![点击朗读](/dictall/images/read.gif)
元件板二极管的焊点采用熔焊技术,增加可靠性。
13.
Slip-on welding plate steel pipe flanges with flat face for PN 0.6MPa (6 bar)
![点击朗读](/dictall/images/read.gif)
GB/T9119.2-1988PN0.6MPa(6bar)平面板式平焊钢制管法兰
14.
Slip-on welding plate steel pipe flanges with flat face for PN 1.0MPa (10 bar)
![点击朗读](/dictall/images/read.gif)
GB/T9119.3-1988PN1.0MPa(10bar)平面板式平焊钢制管法兰
15.
Slip-on welding plate steel pipe flanges with flat face for PN 1.6MPa (16 bar)
![点击朗读](/dictall/images/read.gif)
GB/T9119.4-1988PN1.6MPa(16bar)平面板式平焊钢制管法兰
16.
Slip-on welding plate steel pipe flanges with raised face for PN 0.25MPa (2.5 bar)
![点击朗读](/dictall/images/read.gif)
GB/T9119.5-1988PN0.25MPa(2.5bar)凸面板式平焊钢制管法兰
17.
Slip-on welding plate steel pipe flanges with flat face for PN 0.25MPa (2.5 bar)
![点击朗读](/dictall/images/read.gif)
GB/T9119.1-1988PN0.25MPa(2.5bar)平面板式平焊钢制管法兰
18.
Slip-on welding plate steel pipe flanges with raised face for PN 1.0MPa (10 bar)
![点击朗读](/dictall/images/read.gif)
GB/T9119.7-1988PN1.0MPa(10bar)凸面板式平焊钢制管法兰