1.
Study on the Autogenously Grinding Hammer of Rubbing Machine by Solid Carburizing
揉碎机锤片自磨刃强化固体渗碳工艺的研究
2.
STUDY ON GRINDING HAMMER REINFORCEMENT BY SOLID CARBURIZING
固体渗碳工艺条件下的粉碎机锤片的强化试验研究
3.
Pack boronizing process and properties of the boride layer on 20CrMo steel
20CrMo钢表面固体渗硼工艺及性能
4.
Study on Process and Mechanism of Ion N-C-O Multielements Penetration in an Atmosphere of Air and Organic Liquid;
空气—有机液体离子氮碳氧共渗工艺及机理的研究
5.
Study on Equipment and Process of Plasma Carburizing Surface Hardening of Austenitic Stainless Steel at Low Temperature
奥氏体不锈钢低温离子渗碳表面硬化处理设备及工艺研究
6.
new technology of ionitro-carbon-titanizing
离子氮-碳-钛三元共渗新工艺
7.
Low pressure vaccum carburizing for Cr17Ni2 stainless steel
Cr17Ni2不锈钢低压真空渗碳工艺研究
8.
RE-nitrocarburizing Technology for Piston Rod Made of 40CrMnMo
40CrMnMo活塞连杆稀土离子氮碳共渗工艺
9.
Study on the Plasma Carburizing Process of the Roller of Large Bearing
大型轴承滚柱的等离子渗碳工艺研究
10.
Study on Optimizing the Tecnics of the Super Saturation Carburization on 20Cr Steel and a New Stype Super Saturation Carberization Steel;
20Cr钢超饱和渗碳工艺优化及一种新型超饱和渗碳钢的研究
11.
Test Research on Pretreating Leachate of Chengdu Satination Treatment Site for Solid Waste;
成都市固体废弃物卫生处置场垃圾渗滤液预处理工艺研究
12.
Experimental Study on the Performance of the New Material of Diaphragm Wall--Hardened-Slurry;
地下连续防渗墙墙体新材料——固化灰浆性能及工艺试验研究
13.
The boronizing supply agent of a low-priced solid with RE was introduced, and the experiment of the boronizing process was studied.
介绍一种含稀土元素廉价的固体渗硼剂，并对其进行了渗硼工艺试验。
14.
The Study on the Solid Solution Nitriding of the Austenitic Stainless Steel and Its Bonding with Carbon Steel;
奥氏体不锈钢固溶渗氮及与碳钢复合的研究
15.
Investigation on Anticarbonized Bright Copper-plating Process in Basic Cyanide Baths
碱性氰化物防渗碳光亮镀铜工艺的研究
16.
Research on Ion-nitrocarburizing Processes and Mechanism with N_2 and CH_4 for 40Cr;
40Cr钢氮气—甲烷离子氮碳共渗工艺及机理的研究
17.
Study on Oxycarbonitriding Processes with Air and Methane;
空气—甲烷氮碳氧多元离子共渗工艺的研究
18.
Study on Process and Microstructure Property of RE-boron-vanadizing for Carbon Steel;
碳钢硼钒稀土共渗工艺与组织性能研究