1.
Experimental study and numerical simulation on propagation characteristics of wing type cracks under compression
翼型裂纹扩展特性的试验和数值分析
2.
The crack surfaces in the web and flange were subjected to visual examination in order to evaluate crack growth regions.
为了估计各裂纹扩展区，对翼缘和腹板的裂纹表面进行了宏观检验。
3.
Three structures have exhibited cracking at the ends of flange gusset plates.
已有三个结构在翼缘节点板端部出现了裂纹。
4.
RESIDUAL LIFE ANALYSIS OF THE SKIM PANEL OF AH-24 WING INTEGRAL TANK WITH CRACKS
安—24机翼油箱含裂纹面板的剩余寿命分析
5.
Cracks have been found in the flange and web splices at groove welds in at least four bridges.
至少在四座桥梁的翼缘板和腹板拼接坡口焊缝中发现了裂纹。
6.
These cracks occurred at either the beam flange or in the column flange depending on the reentrant corner weld angle.
这些裂纹视凹形焊角的不同，或者出现在横梁翼缘上，或者出现在立柱翼缘上。
7.
The second crack is a crack originating at the groove weld toe of the column flange-girder flange connection.
第二种是产生于立柱翼缘与主梁翼缘连接处的坡口焊缝焊趾处的裂纹。
8.
Pressing sheet metal forming, its substrate should be crack.
压型金属板成型后，其基板不应有裂纹。
9.
A propagation problem on dynamic Dugdale model of mode III crack
Ⅲ型裂纹动态Dugdale模型的扩展问题
10.
CONTINOUS DISLOCATION DISTRIBUTION MODEL OF MODE Ⅲ INTERFACE CRACK UNDER HOMOGENOUSLY DISTRIBUTED SURFACE LOAD
裂纹面受均布载荷作用的Ⅲ型界面裂纹的位错连续分布模型
11.
Research on the crack growth angles of Ⅰ-Ⅱ-Ⅲ mixed mode crack with photoelastic experiment
Ⅰ-Ⅱ-Ⅲ复合型裂纹开裂角的光弹性试验研究
12.
Elastic-Plasticity Analysis of Ⅰ/Ⅱ Mixed Mode Crack and Probability Caculation of Fracture Failure
Ⅰ-Ⅱ型裂纹的弹塑性分析及断裂失效概率计算
13.
Cracking analysis on corner-inclusive shearing fractures for rubber vibration-reduction spacers
含角裂纹剪切型橡胶减振垫的断裂分析
14.
Analysis of the Main Stress Invariants Criterions for Mixed Mode Crack Initiation Angles
混合型裂纹应力不变量断裂准则的分析
15.
In the tie girder boxes crack growth was detected near the crack tip.
在系杆箱型梁中裂纹尖端附近检测到裂纹的扩展。
16.
Near Crack Line Plastoehstic Andysis of mode ⅢEdge Cracked Plates LoadedbyPoint Forces
Ⅲ型边裂纹受一对集中力时裂纹线场的弹塑性分析
17.
EFFECTIVE MODULI OF AN ELASTIC SOLID WEAKENED BY A PARALLEL ARRAY OF MICROCRACKS
平行微裂纹削弱的弹性体的各向异性有效性能与双周期裂纹模型
18.
BEM Model of ultrasonic scattering field for penny-shaped crack in solid
固体中币形裂纹散射声场边界元模型