说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 单轴载荷
1.
Experimental study of electrical resistivity properties and alert performance of frozen soil under uniaxial load
单轴载荷下冻土的导电性及机敏性能试验研究
2.
Research on Axial Loading-Settlement Curve of Super-Long Bored Single Pile;
超长钻孔灌注单桩轴向荷载—沉降曲线研究
3.
Load distribution analysis in a single row four-point-contact slewing ring
单排四点接触球转盘轴承的载荷分布分析
4.
ANALYSIS OF AXIALLY LOADED SINGLE PILE AND PILE GROUP IN NON-HOMOGENEOUS SOIL
轴向荷载作用下非均匀地基中单桩及群桩分析
5.
Deformation Characteristics of Wires Helix in Single-strand Rope Bearing Axial Load
轴向载荷下单股钢丝绳内部钢丝变形特性
6.
Four pionts angle contact ball bearing is separable bearing,it can be subject to bi-directional load and have the function of both single row and double rows bearings.
四点接触球轴承为可分离型轴承,可承受双向轴向载荷,并有单列和双列角接触球轴承的功能。
7.
Mechanical Behavior of Spherical Plain Bearing Joint under Uni-directional Load
单向载荷作用下向心关节轴承球铰节点的受力性能
8.
Load analysis of cylindrical roller bearing with inclined axis
圆柱滚子轴承轴线倾斜时的载荷分析
9.
There is stop groove in the bearing outer ring or it is simultaneously matched with snap rong.
使用在对轴承向限位精度要求不高又限们结构简单的场合.不能承受轴向载荷.
10.
Deep groove ball bearings mainly take radial load as well as take moderate axial load.
深沟球轴承主要承受径向载荷,也可承受一定量的轴向载荷。
11.
Extended Rankine Approach for Bi-Axial Loading Steel Columns Under Natural Fire
火荷载下双轴受荷钢柱的拓展兰金方法
12.
STABILITY OF MONOSYMMETRIC I-SECTION CANTILEVERS
单轴对称工字形截面悬臂钢梁在横向荷载作用下的整体稳定性研究
13.
Axial load-deformation curve and preload on angular con act ball bearings
角接触球轴承的轴向载荷—变形曲线和预紧
14.
Study on Load Analysis Method for Diesel Engine Crankshaft Main Bearing Based on ADAMS;
基于ADMAS的柴油机曲轴主轴承载荷分析方法研究
15.
Equivalent factors of multi-axle loads for asphalt surfacing on steel bridge decks
钢桥面铺装多联轴荷载的当量轴数研究
16.
How do engineering materials deform when bearing mechanical loads?
如何做工程材料变形时,轴承机械载荷?
17.
The Dynamic Load Distribution and the Estimated Fatigue Life of the Axles on Double Deck Passenger Cars
双客车轴动载荷分布与疲劳寿命估算
18.
Multiaxial Low Cycle Fatigue Life Prediction under Irregular Loadings;
多轴非规则载荷下低周疲劳寿命预测