1.
Online ENDT for hardness depth of iron and steel parts based on Online LS-SVM
基于Online LS-SVM的钢铁件淬硬层深度在线检测
2.
Determination of effective depth of hardening after induction or flame hardening of steel
GB/T5617-1985钢的感应淬火或火焰淬火后有效硬化层深度的测定
3.
Performance Study of Rehardened MC3 Deep Hardening Layer Cold Work Roll;
MC3深淬硬层二次淬火冷轧工作辊使用性能研究
4.
Finite Element Simulation of the Transient Temperature Field During Laser Surface Quenching and Forecasted Depth of the Hardness Layer;
激光表面淬火瞬态温度场的有限元模拟及硬化层深预测
5.
Analysis on Structural Performance of 4CrMo Cold Rolling Worke Roll;
4CrMo超深淬硬层冷轧工作辊组织性能分析
6.
Effect of solution treatment on quenched depth of 7050-T6 aluminum alloy
固溶处理对铝合金7050-T6淬透层深度的影响
7.
Study on the Effects of Grinding Temprature on the Mechanism of White Layer Formation in Grinding of Quench Bearing Steal
淬硬轴承钢磨削温度对磨削白层形成机理影响的研究
8.
Effect of Pretreatment on Microstructure and Microhardness of 30CrMnSi Treatment Layer by Laser Quenching
预处理对30CrMnSi激光淬火处理层微观组织和硬度的影响
9.
Study on Cutting Temperature under Ultrasonic Hard Turning 45 Hardened Steel
超声硬切削45淬硬钢的切削温度研究
10.
Meanwhile, the fracture was accelerated due to the uneven surface hardness and the unreasonable distribution of the hardening layer on the crankshaft, and the bad lubrication condition in service.
同时轴左颈表面硬度不均匀、淬硬层分布不甚合理，工作过程中润滑条件差，加速了曲轴的断裂。
11.
and with constant working current,the lower scanning speed,the deeper harden layer depth and the higher hardness.
工作电流不变,扫描速度越低,硬化层深度越深、硬度越高。
12.
Study on High Speed Cutting Hardened Steel with the Coated Insert (CN35);
硬质合金涂层刀具（CN35）高速车削淬硬钢的研究
13.
Can we control the hardness of the steel when it is harden?
我们能够在钢淬火时控制它的硬度吗?
14.
Influence of overlapping amount on hardness of 9Cr2 steel by laser hardening
搭接量对激光淬火9Cr2钢硬度的影响
15.
An Experimental Research on the Surface Roughness by Dry Cutting of Hardened Steel SKD11
硬态干式车削淬硬钢SKD11表面粗糙度试验研究
16.
Effect of Quenching Treatment on Microstructure and Hardness of (Ti,V)C Steel Bonded Carbide
淬火对(Ti,V)C钢结硬质合金组织及硬度的影响
17.
Influence of Grinding Parameters on the Cylindrical Grinding-Hardened Layer
磨削用量对外圆磨削表面淬硬层的影响
18.
Properties of 45 carbon steel hardened by micro-plasma
微弧等离子45钢表面淬火硬化层性能分析