1.
Study on Particles' Coating in Forced Rotating Fluidized Bed with Spraying;
强制旋流喷雾流化床微粒包衣的实验研究
2.
Experimental Study of Spray Granulation by Inner Heat Vibrating Fluidized Bed
内热式振动流化床喷雾造粒试验研究
3.
Study on Coating Equable Extent in Fluidized Bed Spray Granulation;
流化床喷雾造粒（包衣）过程—涂覆均匀度的研究
4.
Formula and Preparation of Vitamin C Granule by Fluidized Bed Granulation Technology
流化床喷雾制备维生素C颗粒处方筛选与工艺优化
5.
Experimental Investigation on the Conditions Producing Calcium Dihydrogenphosphate Granules with a Spray Fluidized Bed;
流化床喷雾制备磷酸二氢钙的成粒条件实验研究
6.
The Regime of Breakup and Atomization of Viscous Liquid Jets;
粘性液体射流分裂雾化机理及喷雾特性研究
7.
Experiment on spray characteristics of baffle-type injector in cross flow
侧喷挡板式雾化喷油杆喷雾特性实验
8.
atomized spray injectior
(喷注器) 雾化式喷嘴
9.
Spray granulation techniques in fluidized beds are overviewed in terms of the granulation mechanism, the operation mode and influenced factors.
本文介绍了流化床喷雾造粒技术，包括造粒机理、操作方式、影响因素等。
10.
Analysis of Spry Parameter and Research of Granule's Diameter on Circulating Fluidized Bed in the Ore Sintering Flue Gas Desulfurization;
循环流化床烧结烟气脱硫喷雾参数分析及脱硫剂粒子粒径选择研究
11.
Numerical Simulation and Structure Optimization of the Spray Axial-flow Fan;
喷雾轴流风机的内部流场数值模拟及结构优化
12.
Numerical Study on Liquid-solid Two-phase Flow in Low-pressure Swirl Atomizing Nozzle
低压旋流雾化喷嘴内液固两相流动的数值研究
13.
Analysis of Calculation Model for Spray Characteristics of Pressure Swirl Nozzles
压力涡流喷嘴雾化特性模拟的双相流模型分析
14.
Numerical Analysis on Cross Flows Velocity Affected to Swirl Jet Atomization
横向流速度对旋流式喷嘴雾化影响的数值分析
15.
Numerical Simulation and Flowing Characteristic of Spray Fluidized Drying Process Based on Ansys CFX
基于Ansys CFX喷雾流化干燥数值模拟与流动特性
16.
Experiment investigation on atomization characteristic of an air-blast atomizer with centrifugal nozzle and co-dual-swirl cup
离心式同向双旋流器空气雾化喷嘴雾化特性研究
17.
spray carburetor
喷雾汽化器喷雾式汽化器
18.
Study on Atomization Mechanism and Numerical Simulation of Drying Process of Air-Blast Spray;
冲击式气流喷雾雾化机理及干燥过程数值模拟的研究