1.
Study on Design and Optimization Techniques of Parison Thickness for Extrusion Blow Molding
中空挤出吹塑型坯壁厚设计与优化技术研究
2.
Cooling time dominates cycle time in thick-wall moulding like preform moulding.
属厚壁注塑的瓶坯，冷却时间支配着周期时间。
3.
The Numerical Model of Original Shell in Grooved-Mold;
沟槽内壁结晶器初生坯壳的数学模型
4.
Bottle weight, which is the same as preform weight, is essentially non-adjustable.
瓶子的重量(壁厚)相当于瓶坯的重量，而后者基本上不能调整。
5.
Numerical Simulation of Temperature Field and Stress Field for and Axial Crack Analysis of Heavy-wall Centrifugally Cast Hollow Bloom
厚壁离心管坯温度场和热应力场的数值模拟及其轴向裂纹分析
6.
Discussion about Calculating Mode of Solidifying-skull's Thickness in Jinan Steel's Slab CCM
济钢板坯铸机凝固壳厚度计算模型的探讨
7.
FE Simulating and Technics for Forming of Large Thick Cylinder;
大型厚壁筒体成形工艺及有限元模拟
8.
Finite Element Simulation Analysis of Welded Tube Forming with Small Diameter and Thickness
小直径厚壁焊管成型有限元仿真分析
9.
Study and Application on the Cast Material of Crack Resistance Gypsum Mould and Equal Wall Thickness of Cast Mould
抗裂石膏型铸造材料及铸型等壁厚研究与应用
10.
Fuzzy optimal design facing cavity wall thickness of large-scale die casting mold
面向大型压铸模型腔壁厚的模糊优化设计
11.
Steps were made on the female die surface to make up for the thickness different of the blanks.
凹模表面和型腔加工了台阶以补偿坯料的厚度差值。
12.
Nailing experimental calibration for solidification calculation model of plate slab caster in tangshan plate Co.,Ltd.
唐山中厚板板坯铸机凝固计算模型的射钉实验校验
13.
Study on Simulation of Level Fluctuation in Wide and Thick Slab Continuous Casting Mould with Argon Blowing
吹氩宽厚板坯连铸结晶器内液面波动行为的水模型研究
14.
Measurement of the Solidified Shell Thickness in the Secondary Cooling Zone of Continuous Casting of Bloom
大方坯连铸二冷区凝固坯壳厚度测试
15.
Experimental Study and Theoretical Analysis on Load Carrying Apacity of Cold-Formed Flexural Members with Thicknesses Less Than 2mm;
壁厚小于2mm冷弯薄壁型钢受弯构件承载力试验研究及理论分析
16.
Experimental study on behavior of cold-formed steel flexural members with thickness less than 2mm
壁厚2mm以下冷弯薄壁型钢受弯构件性能试验研究
17.
Sclerenchyma cells are a more common type of supporting cell.
厚壁组织细胞是一种常见的支持细胞类型。
18.
Thick wall model simulation of EDM spark locations detection
电火花加工放电位置检测厚壁模型的仿真