1.
MICROSTRUCTURE OF SPRAY WELD COATING ON SMOOTH EDGE OF MOWER BLADE
割草机光刃动刀片喷焊层的微观结构研究
2.
Study on Alloying Elements Impact on Microstructure and Property of the Plasma Arc Welding Layer
合金元素对等离子弧喷焊层组织及性能影响研究
3.
Effect of laser remelting and tempering on microstructure and properties of flame spray-welded Ni-based alloy coatings
激光重熔及回火对Ni基合金火焰喷焊层组织和性能的影响
4.
Study on Plasma Spray Welding of Ni-Based Alloy WC Composite Coatings
等离子喷焊镍基合金碳化钨复合涂层
5.
Preparation and performance analysis on wear-resistance coating of plasma spray welding
等离子喷焊耐磨涂层制备及性能分析
6.
The loss of C,B,Si,Cr and other elements in coatings decreases in the order of plasma,autogenous and faradic spraying.
焊层中的C、B、si、Cr等元素烧损率以等离子堆焊最大,火焰喷焊重熔次之,感应熔焊最小;
7.
Microstructure and Wear Performance of WC Reinforced Ni-based Spraying-Welding Coating
镍基碳化钨喷焊涂层组织与磨损性能研究
8.
Powder flame spray and spray fusig gun,with various powder nozzles attached, can do spray coating with fine metallic powder and ceramic powder.
粉末火焰喷涂喷焊设备，配有各种粉末喷嘴，能喷涂金属微细粉末和氧化物涂层。
9.
Powder flame spray or spray fusing gun can be used with inert gas to feed powder with best coating effects,and can also be used for spary of ceramic powder.
粉末火焰喷涂喷焊设备。用惰性气体送粉，能得到更佳涂层品质，也可喷涂氧化物涂层。
10.
Research on Property of Co-based Series Alloy Strengthening Coatings Prepared on Tape-face Valve by Plasma Spraying Welding;
气门锥面等离子喷焊钴基系列合金强化层的性能研究
11.
Influence of Adding Re-melting on Porosities of Spray-welding Coating on Titanium Alloys Surface and Cause of Porosities
钛合金表面火焰喷焊涂层中气孔的成因及增加重熔对气孔的影响
12.
gas-operated (excl. hand-held) blowpipe
气动喷焊器（手持式除外）
13.
nozlle for atomic hydrogen hand welding equipment
原子氢手工焊设备喷嘴
14.
gas-operated welding blowpipe, high-pressure-type, hand-held
气动熔焊喷焊器，高压型，手持式
15.
nozzle for gas-operated blowippe welding and surface-tempering machines
气动熔焊机器、焊接和表面回火机器用喷嘴
16.
Use a blast cleaner or power tool to remove weld flux slag, weld metal spatters, weld flux fume deposits, rust and damaged paint film in welded areas.
通过喷砂或电动工具除去焊渣、飞溅焊烟、锈迹和焊接部损坏的漆膜。
17.
A mini-sized sand-blasting gun of ejection-and absorption type, used to clean and roughen the metallic surfaces for thermal spraying.
一种小型的射吸式喷砂枪，可用作喷涂喷焊前的表面清洁毛化处理。
18.
Effect of Welding Process on Microstructure and Properties of Surfacing Layer with D212 Welding Electrode
D212焊条堆焊工艺对堆焊层组织性能的影响