1.
A minimum of 3 years experience in stamping design.
3年以上冲压与拉伸模具的设计经验。
2.
The development of stamping/ extrusion tool includes design, process and trial run.
冲压与拉伸模具的设计开发和工艺设定与调试。
3.
A minimum of 3 years experience in stamping design and manufacture.
3年以上冲压与拉伸模具的设计和制造经验。
4.
Pressing Technology of Plasma Color TV s Back Cover and Designing of Drawing Die;
等离子彩电后盖冲压工艺及拉伸模具设计
5.
The principle of the steel hot weld was proposed and the example of the hot weld used in the model repairing was introduced.
简述了金属热喷焊技术的原理,给出了氧乙炔热喷焊技术在拉伸模具修复中的应用实例。
6.
In the forming operation of stamping a complex shape, draw-wall wrinkling means the occurrence of wrinkles in the die cavity.
在冲压复杂形状之间时，拉伸壁起皱就是在模具型腔中形成的起皱。
7.
Excellent knowledge in process,( sheet) metal material and tooling.
优秀的冲压与拉伸产品的加工工艺，金属（金）料和相关模具知识。
8.
To shape or elongate(a wire, for example)by pulling through dies.
拉伸通过印模使（如金属线）成形或伸长
9.
The results of the tensile test indicate that the composite exhibit relatively high strength both at room temperature and high temperature.
拉伸试验结果表明,该种复合材料具有较高的室温和高温拉伸强度。
10.
Under this heading are cupping dies, drawing dies, redrawing dies, reducing dies, and Bulging dies.
这类工具有:压延模、引伸模、复引伸模、缩径模和凸肚模等。
11.
An instrument of torture on which the victim's body was stretched.
拉肢刑架，拷问台一种拉伸受害者肢体的工具或刑具
12.
The Tensile Breaking Progress Simulation and Strength Prediction of Woven Fabric;
机织物拉伸断裂过程模拟及强度预测
13.
CAI Software Development on Measuring Young s Modulus of Tinsel by Pulling and Stretching Method;
拉伸法测金属丝杨氏模量CAI课件开发
14.
Application of AUTOFORM4.1 Software in Automobile Cover Drawing Die
AUTOFORM4.1在汽车覆盖件拉伸模设计中的应用
15.
Design of Progressive Drawing Die for the Mobile Phone Accessory Threading Set
手机饰品穿线套连续拉伸级进模设计
16.
Design of Blanking-Drawing-Trimming Compound Die for the Water-Containing Plate
接水盘落料-拉伸-切边复合模设计
17.
Design of Progressive Die with Side Notching and Horizontal Blanking for Drawing Part
侧冲缺口-横向冲切落料拉伸级进模
18.
Research on the Surface Intensifying Treatment of Drawing Mould with Material QT600-3
QT600-3材料的拉伸模表面强化处理研究