1.
Prediction of the forming limit of sheet metals based on Oyane ductile fracture criterion
基于Oyane韧性断裂准则的板料成形极限预测
2.
Predicting Forming Limit and Simulation of Electrodeposited Nickel Coating Sheet
电沉积镍涂层薄板的冲压成形极限预测与数值模拟
3.
Prediction of forming limit diagram of aluminum sheet at elevated temperatures
温成形中铝合金板成形极限图的预测研究
4.
Prediction of Defects in Tube Hydroforming Based on Forming Stress Limit
基于成形应力极限的管材液压成形缺陷预测
5.
Comparison with experimental values shows that the present approach can predict the forming limit in bulging over a wide range of sheet metals.
与实验结果比较表明，该方法能在较宽的材料范围内预测胀形成形极限。
6.
Experimental Study on Shape Formation and Vertical Ultimate Load Capacity of Post-tensioned and Shaped Hypar Space Truss;
后张拉预应力成形鞍形网壳的成形和竖向极限承载力试验研究
7.
Prediction and Analysis on Deformation Behaviour and Ultimate Bearing Capacity of Single Uplift Pile with Gray System Method
灰色系统法预测分析抗拔桩单桩变形性能与极限承载力
8.
The prediction of the limiting temperature and limiting pressure in oxygen bomb in the process of combustion and application of the synthesis of microsphere oxide
氧弹燃烧过程中极限温度和极限压力的预测及在合成微球氧化物中的应用
9.
The Change of Scouring and Filling Environment after the Construction of Zhangjiabu New Port and the Study of Limit Depth of Scouring
张家埠新港建成后的冲淤变化及平衡时的极限冲刷深度预测
10.
Effect of forming angles on formability in single point incremental forming
单点渐进成形中成形角对成形极限的影响
11.
The Research on the Limit Parameters for One-Operation Forming the Conical Part in Deep Drawing;
圆锥形零件一次成形极限参数的研究
12.
Research on Deformation Mechanism and Forming Limits of Tube Inversion;
翻管变形机理及翻管成形极限的研究
13.
Study on the Bearing Characteristic and Ultimate Bearing Capability Forecast of the Cast-in-place Pile with Branches and Plates;
支盘桩的承载特性与极限承载力预测
14.
Prediction and Computation of Ultimate Bearing Capacity of a Single Pile in Loess
黄土地区单桩极限承载力预测及计算
15.
Prediction of ultimate bearing capacity of piles based on Usher model
桩极限承载力的Usher模型预测
16.
Prediction of Prestress in Vitro and Limiting Stress Based on the Nerve Network;
基于神经网络的体外预应力筋极限应力的预测
17.
Limit Cycles in a Temporal Morphogenesis Model;
关于颞部骨块形成模型的极限环问题
18.
Forming limits and cavitation behaviors of superplastic Al6061/20SiC_w sheet
Al6061/20SiC_w板材的超塑成形极限与空洞行为