1.
continuous quench and temper line
淬火回火连续作业线
2.
Investigation of Compression Mechanic Behavior of HSS in Quenching and Annealing
高速钢淬火回火状态的压缩力学性能研究
3.
Tempering softening of overlapping zones during multi-track laser quenching for carbon steel and alloy steel
碳钢及合金钢搭接激光淬火回火软化特征
4.
Design of Database System of Heat Treatment about Quenching and Tempering for the Commonly Used Steels
常用钢的淬火回火热处理数据库系统设计
5.
Effect of Nb and Quenching/Tempering Temperature on Microstructure and Properties of High Speed Steel Roll
铌含量和淬火回火温度对轧辊用高速钢组织和性能的影响
6.
Research of Percentage of Area Reduction of Quench & Temper Wire Applied to Auto Damping Spring
汽车减震弹簧用油淬火回火钢丝断面收缩率分析
7.
Three . They are hardening, temper and anneal .
三种。 它们是淬火、回火和退火。
8.
Three:they are hardening,temper and anneal.
三个过程：它们是淬火、回火和退火。
9.
A brief introduction to quenching-partitioning-tempering (Q-P-T) process
淬火-碳分配-回火(Q-P-T)工艺浅介
10.
There are three main operations in the heat treatment of steel: hardening, tempering and annealing.
钢的热处理操作主要有三种，即：淬火，回火和退火。
11.
Impact of 60Si2MnA wire rod decarburization on oil-hardened and tempered steel wire
60Si2MnA线材脱碳对油淬火—回火钢丝脱碳的影响
12.
Effect of Tempering Process on Hardness of 27SiMn Steel in Zero Time Holding Quenching
零保温淬火条件下回火对27SiMn钢硬度的影响
13.
Water Quenching and Tempering Technology Research of 1000MPa Ultra-High Strength Dual-Phase Steel;
1000MPa超高强双相钢水淬及回火工艺研究
14.
Doppelduro method
乙炔火焰表面淬火法
15.
Why shall harden steel be annealed ?
淬火钢为什么要退火呢?
16.
Early Failure of Steel Parts and Uncontrolled Microstructure after Carburizing,Post-Quenching and Tempering
钢件渗碳淬回火组织失控及构件的早期失效
17.
Research on Deformation Heat Treatment of Heavy Die Standard Piece
大型模具标准件的拉拔并淬、回火成形研究
18.
Result show that, after quenching at 980℃ and tempering at 450℃, the rich chromium cast iron exhibits excellent mechanical properties and wear resistance.
结果表明，在980℃淬火，450℃回火，高铬铸铁具有优异的力学性能和耐磨性。