1.
carbide-tipped internal turning tool
硬质合金内孔焊接车刀
2.
This paper gives emphasis on discussion of the joint quality assurance and deformation control in internal bore welding at two ends.
本文着重论述双端内孔焊工作中焊缝质量保证及变形控制问题。
3.
This article introduces technical character and choice of the technology refrence date for internal bore welding.
本文概述了内孔焊技术的特点及其应甩,着重介绍了内孔焊接工艺参数的选择。
4.
The Application of Internal Bore Welding in the Manufacture for the Low Pressure Reaction Water Condenser
内孔焊接在低压反应水冷凝器制造中的应用
5.
Inner hole weld" was a new process for the adjacent of tube to tube-sheet of pressure vessels.
内孔焊”工艺是压力容器中管与管板连接所采用的一种新兴工艺。
6.
carbide-tipped internal turning recessing too
硬质合金内孔切槽焊接车刀
7.
Internal defects:lack of penetration,lack of fusion,slag,gas pole,carck,overheating.
内部缺陷：未焊透、未熔合、夹渣、气孔、裂纹、过热。
8.
Testing and Application for Small-tube/tube-sheet Inner Bore Filler Metal Welding
小直径管子/管板内孔填丝对接焊试验与应用
9.
Thus the fracture likely initiated from fatigue sharpened cracks originating from slag and void in the plug welds.
因此，断裂可能是由于从塞焊焊缝内的焊渣和气孔外形成的尖锐的疲劳裂纹而产生的。
10.
Usually, glass insulated terminals are either soldered or cemented into the throughhole in the case.
通常是把玻璃绝缘接线端焊接或者是粘合在壳体上的通孔内。
11.
Spectroscopic Characterization of Keyhole Plasma during Deep Penetration Laser Welding
基于光谱分析的激光深熔焊接孔内等离子体特性研究
12.
holes in joints of welded vessels
焊接容器接头处的孔
13.
openings through welded joints
通过焊接连接处的开孔
14.
welded reinforcement of nozzle opening
接管开孔的焊接补强
15.
Weld identification single hole punch.
鉴别焊缝的单孔冲压机
16.
Usually, glass insulated terminals are either soldered or cemented into throughhole in the case.
通常是把玻璃绝缘接线柱或者是焊接、或者是粘合在壳体上的通孔内。
17.
electrode ,of base metal, coated or cored with flux, for soldering, brazing or welding
焊条,贱金属制,外涂或内心装有焊剂,用于软焊,硬焊或熔焊
18.
electrode ,of metal carbides, coated or cored with flux, for soldering, brazing or welding
焊条,硬质合金制,外涂或内心装有焊剂,用于软焊,硬焊或熔焊