1.
CALIPER LEDGES (TO REAR)
夹制器凸耳（向后）
2.
If lugs are not provided, slings should be used.
如果没有凸耳，则应该采用吊索。
3.
Lug-style is a wafer body but has tapped lugs matching up to bolt circle of Class 125/150 flanges.
凸耳式:平板式阀体,但是具有螺纹凸耳,用于通过螺栓与125/150磅级法兰连接。
4.
Squeeze switch locking tabs inward to release switch from license plate lamp housing.
向内挤压开关锁凸耳，以从牌照灯壳中释放开关。
5.
Slide and tap in reservoir retainer clips until tab locks to housing.
滑动并敲击贮油槽扣件夹，直至凸耳锁紧外壳。
6.
Integral Ear Elimination of Vertex Deletion in CD-TIN;
约束Delaunay三角网点删除的一体化凸耳消元法(IEE)
7.
Influencing factors on unequal earing stamping
冲压成形凸耳不均匀的产生及影响因素
8.
Slide sunshade panel full forward and release the front tabs from track assembly.
完全向后滑动遮阳帘，并从轨道组合上释放前凸耳。
9.
Gently flex the sides of the overhead console bezel far enough to clear the tabs on the rear console housing and remove the housing from the bezel.
轻轻地弯折正顶支柱框一定程度，以清洁在后正顶支柱上的凸耳和从框上拆卸外壳。
10.
A convex surface, body, part, or line.
凸面、凸面体、凸面部分或凸线
11.
die ,for relief printing for stamping
凸版印模感压凸印模
12.
overhead cam shaft
上凸轮轴上部凸轮轴
13.
Convex on one side and concave on the other.
凸凹的一面凸一面凹的
14.
A planoconvex lens used to concentrate light.
凸透镜用来聚光的凸镜
15.
Ears, ears, touch your ears.
耳朵，耳朵，摸摸你的耳朵。
16.
The camshaft has a cam, on which there is a lob, or bump.
凸轮轴上有一个凸轮，凸轮上有一个凸角。
17.
In this arrangement, the cam lobes push against round metal cylinders called cam follower.
在这种布置中，凸轮凸角推动凸轮挺杆。
18.
An Equivalent Condition of Bn Convex, Jn Convex and Pn convex;
B_n凸,J_n凸与P_n凸的一种等价条件