1.
feeder drive link bearing
进料器的传动连杆轴承
2.
connecting rod bearing pouring
连杆轴承巴氏合金浇注
3.
The deformation matrix method is a fast and available method to calculate surface deformation of connecting rod bearing bore.
变形(柔度)矩阵法计算连杆轴承孔表面变形快速、有效；
4.
These fluctuations can be minimized by reducing friction at the bearings of the levers and at their points of contact.
可以通过减少连杆轴承处和联接点处的摩擦来降低经纱张力的波动。
5.
The working conditions, the causes of failures, the early diagnosis for abnormal sound and the maintenance methods are described in this paper.
介绍了连杆轴承的工作条件、造成损坏的原因、早期异响的诊断以及具体的维修方法。
6.
The rolls are mounted with dual heavy-duty bearings on each shaft and resting in machined bearing blocks.
辊经由双重坚固的轴承连杆置于轴承套中。
7.
Structure Optimization for Hydrostatic Supporting Bush of Crank Shaft and Rod Type Hydraulic Motor
曲轴连杆式液压马达静压支承连杆瓦结构优化
8.
For this big-end bearing, steel-backed lead or tin shell bearings are used.
对连杆大头轴承来说，使用的是铅的钢背或锡的轴瓦式轴承。
9.
"The connecting rod carries the power thrusts from the piston to the crankpin. At the same time, the rod is in eccentric motion."
"连杆的作用是将活塞承受的压力传给连杆轴颈。同时,连杆做偏心运动。"
10.
The bearing shells must be installed so that the tangs are in the machined grooves in the rods and caps.
安装轴瓦时，应使凸舌位于连杆和轴承盖的加工槽内。
11.
Disconnect stabilizer bar links at the axle.
断开车轴上稳定杆连杆。
12.
"On many engines, the connection-rod and main bearings (crankshaft bearings) can be checked for wear with an oil-leak detector before the engine is torn down."
许多发动机在拆卸之前,可以用漏油检测装置检查连杆和主轴承(曲轴轴承)的磨损情况。
13.
The rod-bearing cap attaches the connecting rod to the crankpin.
连杆轴瓦盖将连杆安装到曲轴销上。
14.
The main bearing journals fit into the cylinder block and the big end journals align with the connecting rods.
主要轴承曲颈安装在气缸体和与连杆大头末端匹配的曲颈上。
15.
A pole connecting the rear axle of a vehicle with the front.
连接杆连接车辆前后轴的杆
16.
boring machine for connecting rod and cylinder block bush
连杆瓦及缸体轴瓦镗床
17.
Bar or rod joining parts of a machine or transmitting power in a machine
（机器的）连杆，传动轴，旋转轴
18.
Stem bearing to assure concentric stem rotation, allowing stem packing to provide maximum sealing effectiveness.
阀杆轴承保证同轴阀杆的旋转，使得阀杆填料具有最大的密封效果。