1.
The rate of curing and consequently the rate of heat generation increase with the temperature.
固化速度，因而还有放热速度，都随温度而增加。
2.
A Study on the Effect of Carbon Black Pigment on the Curing Rate of UV Ink
碳黑颜料对紫外线油墨固化速度影响的研究
3.
Study on the effect of factors on curing rate of photosensitive resin in Stereo Lithography
SL中光敏树脂固化速度的影响因素研究
4.
The fineness of fly ash influences on the solidifying velocity and coating film performance of polyurethane waterproof coating.
粉煤灰的细度对防水涂料的固化速度和涂膜性能都有影响。
5.
Research on Over-cured Depth in Stereolithography Process
光固化快速成形工艺中过固化深度的研究
6.
Speed Control Switch Mounting Screws
速度控制开关固定螺丝
7.
The downward velocity of solids is sufficiently high.
固体的向下速度相当高。
8.
A Study on the Relationship between Porosity and Velocity of Unconsolidatod Sediments;
关于孔隙度变化对海底未固结成岩的疏松地层速度的影响研究
9.
Multi-Scale Simulation of Influence of Casting Speed on Microstructure Evolution of Al-1.2Mg-0.7Si Semi-Solid Alloy
铸造速度对Al-1.2Mg-0.7Si半固态合金组织演化影响的多尺度模拟
10.
Catalyst sintering in fixed-bed reactors: deactivation rate and thermal history.
在固定床式反应器中的催化剂烧结：失活的速度和热变化过程
11.
The Influence of Accelerated Aging and Toothbrushing on the Color and Microstructure of Light-Curing Resin Composites;
加速老化和刷牙对光固化复合树脂色度和微结构的影响
12.
electrofixer rapid ager
电热固色快速蒸化机
13.
LIQUID - SOLID CIRCULATING FLUIDIZED BED (Ⅱ)STUDIES ON THE APPARENT SLIP VELOCITY AND DRAG COEFFICIENT
液固循环流化床的研究(Ⅱ)表观滑落速度及曳力系数
14.
The rate of change of velocity with respect to time.
加速度速度相对于时间变化的速率
15.
SADT calculation of solid organic peroxides based on small sample mass of heterogeneous reaction
基于非均相反应小尺度实验的固态有机过氧化物自加速分解温度推算
16.
Curing: The rapid solidification of ink or varnish by means of chemical action.
固化:用化学方法使油墨或光油 速变成固体。
17.
A review of the influential factors of the curing degree of light curing composite resin
光固化复合树脂固化程度的影响因素
18.
A Probe Into the Speed and Speed Endurance Through the Biochemical Basis;
从生化角度探讨速度及速度耐力训练