1.
The Design of Fused Deposition Modeling Rapid Prototyping Machine and the Study on It's Theory;
熔融挤压堆积快速原型机的设计及理论研究
2.
ANALYSIS OF SPRAY HEAD STRUCTURE OF FUSED DEPOSITION MODELING FOR RAPID PROTOTYPING
熔融挤压快速成型系统的喷头结构分析
3.
Development on Methods for Determining Shearing Viscosity of Extruded Food Melt
食品挤压熔融体剪切黏度测定方法研究进展
4.
Preparation of Nylon 6 with High Viscosity by Chain-extension during Melting Extrusion
熔融挤出扩链反应制备高粘度尼龙6
5.
Equipment assembling technique for modern BOPET lines' chip melting and extruding system
现代BOPET生产线熔融挤出系统配置技术
6.
Solid Melting Section on the Ram Extruder Based on ANSYS
基于ANSYS的柱塞挤出机熔融段研究
7.
Lava was ejected from the volcano.
熔岩受到压挤而从火山口喷射出来。
8.
The Casting, Fogging, Extrusion, Rolling & Steel
钢材的熔铸、锻造、挤压及延轧
9.
This paper introduces an analytical melting model for extrusion to calculate the melting rate and predict the meltingcapacity of screw.
根据挤出熔融模型用解析法计算熔融速率,预测螺杆的塑化能力。
10.
Melt spinning involves melting the nylon in an inert atmosphere, controlling the extrusion and solidification of the melt, and collecting the extruded filaments.
熔纺包括尼龙在惰性气体中的熔化、控制熔融体挤出和固化、卷绕挤出的长丝等几个过程。
11.
Study on the Extrusion Moulding of Ultrahigh Molecular Weight Polyethylene under Ultrasonic Irradiance;
超高分子量聚乙烯的超声熔融挤出成型研究
12.
The Theory and Visualization of Submacroscopic Melting Process in Single-Screw Extrusion;
单螺杆挤出的亚宏观熔融理论及可视化研究
13.
Research on Grafting Maleic Anhydride onto Polyolefin with Melt Extrusion
聚烯烃熔融挤出接枝马来酸酐的研究进展
14.
Study on the Melt Graft-Reacting Extrution of PE or EPDM with MAH and the Alloying of PA Toughened by the Grafts;
MAH与PE或EPDM熔融接枝反应挤出和挤出物增韧PA合金化的研究
15.
Research on Side Extruding Formation of Equal-Section Cores;
小型等断面熔模型芯的侧向挤压成形研究
16.
Numerical Simulation of Power Consumption Characteristics in Conveying Element in Triple Screw Extruder
三螺杆挤压机熔体输送段功耗特性的数值分析
17.
Visualization of Melting Mechnism and Phase Transition for Single Screw Extrusion with Screw Being Cooled;
螺杆冷却时单螺杆挤出过程熔融机理及相变行为的可视化研究
18.
Study on Melt Mixing of Nano Powder and Polymer in Co-Rotating Twin Screw Extruder;
纳米粉体与聚合物在同向双螺杆挤出机中的熔融混合研究