1.
demolding agent
混凝土模制的水分散脱模剂
2.
Influence of Waxes on the Properties of EMC
脱模剂对环氧模塑料性能影响的研究
3.
If the mold spray is sticky, reduce the silicate.
如果脱模剂发粘，则减少硅酸盐。
4.
Cork mold spray solutions have a tendency to deteriorate or ferment.
软木粉脱模剂溶液易于变质或发酵。
5.
The stickiness tends to disappear on standing.
搁置时脱模剂的粘性易于消失。
6.
Method Analysis on Eliminating Air Voids on the Fair-faced Concrete Surface
利用蒙脱石基脱模剂消除清水混凝土表面气泡的途径分析
7.
In all the formulas for mold spray, a common ingredient is water.
在给出的所有脱模剂配方中，水是共用的拼料。
8.
Clean any release agents and impurities before spraying spraying the paint on the surface.
喷涂前应清除塑料表面的脱模剂及其它杂质。
9.
Research on Powder Release Agent for Aluminum Alloy Die Casting;
铝合金压铸用粉状脱模剂的开发与性能研究
10.
Too much water reduces the adhesion and too little piles the material up too thick on the mold surface.
水太多会减少粘附力，加水太少则会使脱模剂在模具表面堆积太厚。
11.
It is the usual custom for each battery manufacturer to make his own spray from materials obtained locally.
各蓄电池生产厂都习惯采用从当地获得的材料配制脱模剂。
12.
It is difficult to set down an exact formula because cork is a natural product.
要确定脱模剂的精确配方是困难的，因为软木是一种天然产物。
13.
Study on Numerical Simulation of Humectation Sweetening Process by Highly Active Desulfurater
高活性脱硫剂增湿脱硫过程的数值模拟
14.
Preparation of Desulfurization Adsorbents for Gasoline and Investigation of Molecular Simulation;
汽油脱硫吸附剂制备及分子模拟探索
15.
Study on Removing Organic Template from SBA-15 by HNO_3 Oxidation Treatment
HNO_3氧化脱除SBA-15中有机模板剂的研究
16.
Simulation and optimization of azeotropic distillation of the solvent dehydration column
溶剂脱水塔共沸精馏过程模拟与优化
17.
antifoaming agent, antifoamer
防[泡]沫剂,脱泡剂,消泡剂
18.
The Experiment Study and Numerical Simulation of Multi-component Catalysts in the Selective Catalytic Reduction (SCR) of Nitrogen Oxides;
SCR多元催化剂脱硝性能试验研究及数值模拟