1.
Cutting Tool Shape Radius Recompense Inaccuracy Analysis by Grinding Crucial Point CNC Turning Cutting Tools
数控车削刀具的刃磨引起的刀尖半径补偿的误差分析
2.
Error Analysis Caused of CNC Lathe Tool Nose Radius
![点击朗读](/dictall/images/read.gif)
数控车刀刀尖圆弧半径引起的误差分析
3.
Application of Compensation to Corner Radius in Turning of Inside and Outside Diameter
![点击朗读](/dictall/images/read.gif)
刀尖圆弧半径补偿在内外径车削加工中的应用
4.
The effects of tool nose curvature radus on the accuracy in numerical control lathe;
![点击朗读](/dictall/images/read.gif)
数控车中刀尖圆弧半径对车削精度的影响
5.
Application of Tool Corner Radius Compensation in NC Turning
![点击朗读](/dictall/images/read.gif)
刀尖圆弧半径补偿在数控车削中的应用
6.
Analysis of tool nose radius compensation in numerical control turning processing
![点击朗读](/dictall/images/read.gif)
数控车削加工中刀尖圆弧半径补偿分析
7.
Tool Nose Round (Corner) Radius Compensation and Tool Wear Compensation Based on FANUC 0iT NC System
基于FANUC 0iT系统刀尖圆弧半径补偿与刀具磨耗补偿
8.
The Analysis and Application of the Tool Radius Compensation in CNC Turning
![点击朗读](/dictall/images/read.gif)
数控车削加工中刀尖圆弧半径补偿的分析与应用
9.
The cutting edge radius of the tools is minimized less than0.05μ m and the radius waviness of the tools is improved no more than0.2μ m.
刃磨出的金刚石刀具刃口半径值可以达到0.05μ以下,刀尖圆弧圈度提高到0.2μ以内。
10.
All sharp corners to have 0.01 Max. Radii.
![点击朗读](/dictall/images/read.gif)
所有尖角最大半径0.01
11.
a pin-point, knife-point, pencil point, etc
![点击朗读](/dictall/images/read.gif)
针尖儿、 刀尖儿、 铅笔尖儿
12.
Indexable hard metal (carbide) inserts--Corner radii
![点击朗读](/dictall/images/read.gif)
GB/T2077-1987硬质合金可转位刀片圆角半径
13.
Research on Cutting Tool Radius Compensation in NC APT
![点击朗读](/dictall/images/read.gif)
数控自动编程中刀具半径补偿的研究
14.
The Research of Cutter Radius Compensation of Five-Axis CNC System;
![点击朗读](/dictall/images/read.gif)
五轴联动数控系统刀具半径补偿研究
15.
The Application of the Cutting Tool Radius Compensates in the CAM System;
![点击朗读](/dictall/images/read.gif)
刀具半径补偿在CAM系统中的应用
16.
The Analysis and Application of the CNC Milling Machine Tool Radius Compensation
![点击朗读](/dictall/images/read.gif)
数控铣床刀具半径补偿的分析与应用
17.
Application and Advert Proceeding of Cutting Tool Radius Compensatory Function
![点击朗读](/dictall/images/read.gif)
刀具半径补偿功能的应用及注意事项
18.
Research on 3D Cutter Radius Compensation for 5-Axis End Milling
![点击朗读](/dictall/images/read.gif)
五轴端铣加工中3D刀具半径补偿研究