1.
mould setting-and-stripping bay
钢锭模准备和脱锭跨
2.
The moulds are made of cast iron.
钢锭模是用铸铁做的。
3.
PRINCIPLE OF IMPROVING KILLED STEEL QUALITY BY BLOWING Ar INTO MOLDS
钢锭模内吹氩提高镇静钢质量的原理
4.
The major equipments are the ladle and the mould. a ladle is a container to hold the molten steel tapped from the steel making furnace.
主要的铸锭设备有盛钢桶和钢锭模。盛钢桶是用来盛装从炼钢炉放出的钢液的容器。
5.
The molten metal may enter the ingot mould in two ways: from the top and from the bottom.
钢液注入钢锭模可采用两种方式:上注和下注。
6.
Using Numeral Simulation to Optimize Casting Method Design of a Heavy Vermicular Iron Steel Ingot Mold
用数值模拟优化大型蠕铁钢锭模工艺设计
7.
Surface pinholes caused by gas formed at the mould surface.
因钢锭模表面生成气体而形成的表面针孔。
8.
In order to prevent the molten slag on the top of the steel from entering the ingot moulds, the steel is poured from the bottom of the ladle.
为了防止浮在钢液表面上的熔渣进入钢锭模,钢液从盛钢桶底部放出。
9.
In bottom pouring, the molten steel is poured into a central trumpet, from where it flows through runners to the bottom of a number of ingot moulds.
下注法是把钢液浇人中心注管,钢液从中心注管通过流钢槽流到若干个钢锭模底。
10.
So less gas is given off in the mould than with rimming steel, but enough bubbles form at the top of the ingot to counteract most of the shrinkage,
所以,在钢锭模内析出的气体没有沸腾钢多,但又在钢锭头产形成足够的气泡抵消大部分钢的收缩。
11.
The Comparative Advantages of Ingot Casting Production During the Special Steels and Large Steel Ingot Production
模铸在大钢锭及特殊钢生产方面的比较优势
12.
Mathematical Model of the Heat Transfer and Optimization of Cap Section Design in Killed-Steel Ingot
镇静钢锭热过程数学模拟及帽口优化设计
13.
Numerical Simulation for Temperature Field of Forging Ingot Solidification Process and Application;
锻造用钢锭凝固过程温度场数值模拟及其应用
14.
Coupled Numerical Simulation of Solidification Transport Behaviours in Electromagnetic Continuous Casting of Steel Ingots;
电磁场下钢锭连铸凝固传输行为耦合数值模拟
15.
Numerical Simulation of the Process of Vertical and Directional Solidification of Large-size Steel Ingot;
大型垂直定向凝固钢锭凝固过程数值模拟
16.
Application of Computer Simulation on Process Optimization of Large Ingot
计算机模拟在大型钢锭工艺优化中的应用
17.
Modelling of macrosegregation in large steel ingot with considering solid movement
考虑固相移动的大尺寸钢锭宏观偏析数值模拟
18.
Investigation on Thermal Stress Distribution of Cr5 Large-scale Alloy Steel Ingot by Simulating
Cr5大型合金钢铸锭热应力状态的模拟分析