1.
The Control of Nitrogen & Hydrogen Content in Nonquenched and Tempered Crankshaft Steel 48MnV-C
非调质曲轴钢48MnV-C钢中氢氮含量的控制
2.
The Technical Research of the Forging Crankshaft in the Enging Locomotive;
内燃机车柴油机锻钢曲轴的工艺研究
3.
Analysis for Dynamic Buckling of Stainless Steel Pipe under Axial Impulsive Load Based on LS-DYNA;
基于LS-DYNA的轴压不锈钢管屈曲分析
4.
Local buckling of concrete-filled square steel tubular column subject to axial compression
方钢管混凝土柱在轴压下的局部屈曲
5.
The Development of Forge Steel Crankshaft of the Big Power Diesel Engine Heat Treatment Processing;
大功率柴油机锻钢曲轴热处理工艺的开发
6.
Research on Heat Treatment Temperature Measure & Control System for Forging Steel Crankshaft on a Large Scale;
大规模锻钢曲轴热处理温度测控系统的研制
7.
Elastic Flexural-torsional Buckling of Monosymmetric Web-tapered I-beams;
单轴对称楔形工字钢梁的弹性弯扭屈曲
8.
Elastic Flexural-torsional Buckling of Doubly Symmetric Web-tapered I-beams;
双轴对称楔形工字钢梁的弹性弯扭屈曲
9.
The Theoretical Research on the Local Buckling of Concrete-filled Steel Tubular Column Subjected to Axial Compression
钢管混凝土柱在轴压下的局部屈曲的理论研究
10.
Simulation on Load versus Strain Curves of Concentrically Compressed Concrete Filled Circular CFRP-Steel Tubular Stub Columns
圆CFRP-钢管混凝土轴压短柱荷载-应变曲线模拟
11.
Study on Hot Deformation Behavior of Medium-Carbon Non-quenched and Tempered Steel for Crankshafts
一种曲轴用中碳非调质钢的热变形行为
12.
DISTORTIONAL BUCKLING BEHAVIOR OF HIGH STRENGTH COLD-FORMED STEEL COLUMNS SUBJECTED TO AXIAL COMPRESSION
高强冷弯薄壁型钢轴压柱畸变屈曲研究
13.
Reasonable Control the Upper Crop End and Lower Crop End Weights,and Improve the Utilization Rate of Crankshaft Blank of Electroslag Remelting Ingot
合理控制切头切尾量,提高电渣钢曲轴坯成材率
14.
Improvement of Pit Furnace Gas Nitriding Technics of 40CrNiMoA Steel Crankshaft
40CrNiMoA钢曲轴井式电阻炉中气体渗氮工艺的改进
15.
BUCKLING ANALYSIS OF L-SECTION STEEL COLUMN UNDER AXIAL COMPRESSION BY FINITE ELEMENT METHOD
基于有限元法的L形轴压钢柱屈曲分析
16.
crankshaft (main journal turning lathe)
曲轴（主轴颈）车床
17.
Study on Magnetic Characteristics of Bending Fatigue Damage to 48MnV Steel Used for Automobile Crankshafts;
车用曲轴材料48MnV钢弯曲疲劳损伤的磁记忆表征研究
18.
upper center crankshaft bearing
曲轴主轴承上中轴瓦