1.
boat of refractory metal
(真空镀膜用) 高熔点金属舟
2.
RECOVERY OF REFRACTORY METALS AND ALLOYS FROM SCRAPS VIA HYDROGEN REDUCTION OF CHLORIDES
用氯化物氢还原法从废料中回收高熔点金属和合金
3.
Control of coating deformation of high melting point metal in arc spray tooling
高熔点金属电弧喷涂快速制模涂层变形控制研究
4.
Synthesis of Solid Solutions and Intermetallic Compounds by Mechanical Alloying;
机械合金化制备高熔点、低熔点金属固溶体和化合物的研究
5.
To solder(two pieces of metal)together using a hard solder with a high melting point.
硬焊用高熔点的硬质焊锡将（两块金属）焊在一起
6.
metal(lic) bath
金属熔池，金属熔体
7.
Lead fuse at a lower temperature than some other metals.
铅的熔点比其他一些金属低。
8.
To join(metals)by applying heat, sometimes with pressure and sometimes with an intermediate or filler metal having a high melting point.
焊接通过加热，有时加压或有时用媒介物或有很高熔点的填充金属来连接（金属）
9.
high and low frequency induction furnace combined for melting metals
高低频混合感应炉,用于金属熔化
10.
It is necessary that the metal should not melt at very high temperature .
必须是这种金属在高温下不会熔化。
11.
hot-metal charge
熔融金属料, 铁水
12.
liquation process
熔析法 -金属精炼
13.
Ferroalloy usually have lower melting ranges than do the pure elements and can be incorporated more readily in the molten steel.
铁合金的熔点通常较纯金属元素为低,并能较迅速地与钢水熔合。
14.
When the temperature reaches melting point, the metal runs off as a liquid and flows into special moulds.
当温度达到熔点时，金属成为熔液流出。再进入特别的铸模。
15.
All metals will melt though some require greater heat than others.
所有的金属都会熔化，虽然有的金属熔化时比其它金属需要更高的温度。
16.
To melt(metal)and pour into a mold.
熔化，熔制把（金属）熔化并注入模子
17.
The erosion of metals varied depending largely on the melting point.
金属的烧蚀在很大程度上随熔点而变化。
18.
CHARACf ERISTIC OF METALLIC BOND AND ANOMALY OF MELTING POINT IN THE EARLY ACTINIDE METALS
轻锕系金属的价键特征及其熔点递变反常现象