1.
Study on Effect of Milling Parameters on Milling Force in High-speeding Milling of LF21 Aluminum Alloy
高速铣削LF21铝合金铣削参数对铣削力影响规律的研究
2.
A Mathematical Model and Analysis of Plunge Milling Force on Aluminum Alloy
钛合金TC11插铣铣削力建模与分析
3.
Milling Force Modeling, Simulation and Experimental Study of High Speed Milling;
高速铣削过程铣削力建模与仿真及实验研究
4.
Research on Cutting Force and Surface Roughness of High-speed Ball-end Milling;
球头铣刀高速铣削力及加工表面粗糙度的研究
5.
Research on the Key Technology of Modeling and Simulation of Milling Force of Ball-end Mill;
球头铣刀铣削力建模及仿真关键技术研究
6.
Modeling Methodology of Milling Deflection and Flexible Milling Force for Tooth Profile of Low-rigidity Cycloid Gear in High Speed Milling
低刚度摆线轮缘高速铣削变形与铣削力建模方法
7.
Development of the Prediction Software and Experimental Investigation on High Speed Milling Force;
高速铣削力预测软件开发与实验研究
8.
Sensitivity Analysis of Parameters Affecting Milling Force in Plunge Milling of Titanium Alloy TC11
TC11钛合金插铣加工铣削力影响参数的灵敏度分析
9.
Feedrate Scheduling Based on Predictive Force Model for NC Machining;
基于铣削力预测模型的加工进给率优化研究
10.
Research on Cutter Wear State Recognition Base on Milling Force Signal;
基于铣削力信号的刀具磨损状态识别研究
11.
On Power Milling and Judgment of Headstock Malfunction;
铣床强力铣削与铣床主轴箱故障“异声”判断
12.
Study on Cutting Force for Milling Hardened Steel Arc Path with Micro-end Mill
小直径铣刀铣削淬硬钢圆弧切削力研究
13.
Dynamics Research on Titanium Alloy High-speed Plunge Milling Theory and Optimization of Cutting Parameters;
钛合金高速插铣动力学研究及铣削参数优化
14.
On the Dynamics of the Milling of Ball End Milling: Modeling of Cutting Forces and Simulation;
球头铣刀铣削加工过程的动力学建模及仿真
15.
Study on the Cutting Force Modeling and Machined Surface Topography Simulation in Ball-end Milling Process;
球头铣削切削力建模与加工表面形貌仿真研究
16.
Research on High Speed Milling Forces and Cutter Path Optimizing;
高速铣削切削力变化及刀具轨迹优化研究
17.
Theories and Experiments of Plunge Milling Cutting Force and Temperature on Titanium Alloy;
钛合金插铣切削力及切削热理论与实验研究
18.
Experimental study on cutting force during high-speed ball-end milling of al alloy
球头刀高速铣削铝合金切削力的试验研究